The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?

Wrenching this Labor Day
Plenty of places to share.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
0 members (), 49 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,009
Posts1,055,293
Members48,419
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#702456 12/11/2010 12:24 AM
Joined: Dec 2009
Posts: 37
L
New Guy
New Guy
L Offline
Joined: Dec 2009
Posts: 37
Hi! First, I apologize if this is the wrong forum for this post, it seemed closer than the electrical bay. I have a 1961 C20 and my speedometer is giving me a lot of trouble. What happens is, it waves back and forth. It has happened before, i disconnected the cable from the tranny and gauges, stuck a bag over it like a funnel full of PB spray lube and spun the cable from the transmission end until PB came through. this worked. But it happened again, wavering back and forth from 5mph-80mph when i was going about 45mph. I gave it the same treatment and it got a little better (20mph-40mph when going about 30) but not much. Is my speedometer stripped? the tranny? cable? any suggestions are appreciated! Thanks -- Hunter

Locomah #702457 12/11/2010 12:35 AM
Joined: Jul 2001
Posts: 3,887
S
Cruising in the Passing Lane
Cruising in the Passing Lane
S Offline
Joined: Jul 2001
Posts: 3,887
a better fix would be to pull the inner piece out, so you can actually clean it, and flush the outer sheath with the cable out, then lube it lightly and reassemble .... nothing is stripped, but it could be that the speedo head itself is equally gummed up

Bill


Moved over to the Passing Lane

"When we tug a single thing in nature we find it attached to the rest of the world" John Muir
"When we tug a single thing on an old truck, we find it falls off" me
Some TF series details & TF heater pics & Rust-a-holics Unanimous parking lot
Joined: Dec 2009
Posts: 37
L
New Guy
New Guy
L Offline
Joined: Dec 2009
Posts: 37
thanks, i'll do that first chance I get, i was hesitant to pull the inner piece out in fear that i couldnt get it back in


Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0