| |
Click on image for the lowdown. 
====
| | |
7 members (klhansen, edgardo, Hanks custodian, TexasJim50, stlcardinalsguy, Woodcmiami, 1 invisible),
57
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,059 Posts1,055,820 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#69783 12/10/2006 12:32 AM | Joined: Nov 2006 Posts: 63 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2006 Posts: 63 | Hello All , So I found my dad has an old Borg Warner 3 spdOD andI have no idea what year or what it will fit. The Numbers I took off of are as follows, On the Tailhousing # R10E-1A,W.G.DIV 48. All I could find on the Tranny it's self is #1A-7222, this was by the shifters. I have pics too but if anyone can go off this info please let me know. I have decided to go with a factory 3spd OD for my truck in order to try and get a better top end speed. I like bolt in stuff so that's the best route for my to go. Thanks!
Thanks,as always -Danny
1960 C-10 Stepside,Longbox
235,4spd 3.90 diff.
| | |
#69784 12/10/2006 1:38 AM | Joined: Feb 2002 Posts: 12,029 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Feb 2002 Posts: 12,029 | sounds like the one to me, should fit yer truck - look like this? - just check the mount hole spacing and the length against yer current trans, if they're the same ya lucked out Bill | | |
#69785 12/11/2006 11:06 PM | Joined: Apr 2005 Posts: 2,097 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 2,097 | Danny, If it has a 4 bolt side cover it is the early style 55-65 non syncro first gear and will bolt in place if you have the long tail housing stock 3 speed. In the early 60's GM started using the short tail housing so you may have to shorten the driveline. If it has the 7 bolt side cover it is a later Saginaw - full syncro. It will require a fine spline front yoke and will have different shift arms on the side cover, it also may have a larger front bearing retainer. Either one will make you happy. Fred
1956 3100 Pickup/Red/350/3sp OD/PS/Disc Brakes
1957 Bel Air Sport Coupe/Red/355/TH350/PS/Disc Brakes
2017 Silverado LT Single Cab SB/Black/5.3/6 Speed Trans
1947 Willys CJ2A w/F-Head engine
| | |
|
|
| |
