| |
Click on image for the lowdown. 
====
| | |
1 members (Otto Skorzeny),
85
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,162 Posts1,056,941 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2003 Posts: 64 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2003 Posts: 64 | Anybody have anything to say good or bad about new brake drums? Made in China?? They seem to be about $100 each. Does anyone know the measurement for the limit of turning the drums. Mine are a little under 11 1/16". | | | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | I think the limit on the 11" drums was .060 which is close to 1/16" or .062". I bought new drums from Jim Carter and they were made in Argentina. Two drums were .005" over and one was .015" over. I gave up trying to get a response from them but a new drum should not be .015" over. The drums look good but they don't have the ridges on the outside. Also they appear to be a one piece cast unit rather than part steel and part cast. | | | | | Joined: Jan 2003 Posts: 64 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2003 Posts: 64 | Thanks for your reply, i am still confused about one thing. Is it a .060 cut which results in an increase in diameter of .120, or is it a cut of .030 resulting in an increase of .060. My drums measure about 11.110. Thanks again
Opportunity is missed by most people because it is dressed in overalls
and looks like work. - Thomas Edison
1941 AL 3/4 ton 125-1/4 WB, bought by my Great Uncle Matt in 1942. Still in the family.
| | | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | It is the .030 cut or a total diameter of .060" over. If you can pass safety with them a little over .060", you shouldn't have a problem. | | | | | Joined: Oct 2009 Posts: 69 'Bolter | | 'Bolter Joined: Oct 2009 Posts: 69 | I found this article helpfull. Drum Brakes.
When God gives any man wealth and possessions, and enables him to enjoy them, to accept his lot and be happy in his work�this is a gift of God. He seldom reflects on the days of his life, because God keeps him occupied with gladness of heart. Ecclesiastes 5:19-20
| | |
|
|
| |
