The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
7 members (LAROKE, Stovebolt48, Tronman, Bwana-Jim, Otto Skorzeny, Lightholder's Dad, 1 invisible), 72 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,042
Posts1,055,511
Members48,424
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
Joined: Mar 2010
Posts: 22
O
New Guy
New Guy
O Offline
Joined: Mar 2010
Posts: 22
Does anyone know what a piece is that I found on the inside and about half way down the steering column? It's cone shaped on one end and the other a tube. Maybe 6 inches in length. The cone end keeps it snug in the steering column and the other surrounds the steering shaft. The cone end has three notches which allow it to be pulled out of the column when aligned with tabs pressed into the steering wheel end of the column.

My truck is a manual shift on the floor so is this an extra part for an automatic? An alignment tool of some kind? Do I need it or should I take it out?

Both my '63-'64 truck manuals have nothing to say about this piece. I'm reinstalling a new turn signal switch and want to make sure I'm using all the necessary pieces...which I thought I had until I got curious and took that base ring/washer off and found this part behind it.


1964 Chevy C20
Joined: Oct 2005
Posts: 116
O
Shop Shark
Shop Shark
O Offline
Joined: Oct 2005
Posts: 116
Go to www.lmctrucks.com , click on the appropriate page for the steering column and see if it shows the piece you're describing ? If not , go to one of the other Chevy vendors web page and see if it is shown . Good luck !


" The heart of the wise inclines to the right , but the heart of the fool to the left " - Ecclesiastes 10:2
Joined: Nov 2004
Posts: 1,552
4
Shop Shark
Shop Shark
4 Offline
Joined: Nov 2004
Posts: 1,552
Take a picture and shoot me an e-mail at: [email protected]

I have all the parts, so I am sure I can help you.


Moderated by  Hambone, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0