| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,040 Posts1,055,475 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2010 Posts: 4 New Guy | | New Guy Joined: Apr 2010 Posts: 4 | I remeber seeing somewhere an explanation of the grill size for AD big trucks but a search didn't turn up anything. Can I use an AD pickup grill or at least the bars to replace the grill on my '52 6400?
Thanks | | | | | | ZooKeeper Unregistered | | ZooKeeper Unregistered | 1.5 ton & up use a taller bar then the 1/2 to 1 ton trucks.
They are the same width though.
On my one ton I used the larger truck bars because at the time is was all I could find.
If I could find the correct bars/grill when I had the extra cash at the same time I might swap it out.
On the smaller trucks using the taller bars you most likely couldn't tell unless you had a good eye or a tape measure. But the other way around I would bet $$$$ you could see the difference, since the larger truck bars are about a half inch taller & the bars are spaced farther apart..joe | | |
|
|
| |
