| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,018 Posts1,055,339 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2009 Posts: 50 Wrench Fetcher | | Wrench Fetcher Joined: Aug 2009 Posts: 50 | So 8 months ago i bought a 65 c20. The previous owner had put a different seat into it. It does not look or fit properly.
So today while at the wrecker, I found a 68 chev c20 with a stock bench seat in it. It appears it should fit properly, But before i go pay the wrecker $50 and have it re done. I just want to make sure im doing the right thing.
The truck is a toy, and not driven daily. I want it to be as stock as possible.
so my question.......
Is everyone with a stock bench seat happy with it? will the seat from a 68 fit like a stock 65 seat?
thanks and sorry for the long post.
Last edited by trevota; 01/18/2010 10:42 PM.
| | | | | Joined: Nov 2004 Posts: 1,552 Shop Shark | | Shop Shark Joined: Nov 2004 Posts: 1,552 | The '60-'66 Chevy/GMC factory bench seats are the same, but slightly different than the '67-'72 Chevy/GMC bench seats. If the later years fit, I guess you can use one, however, to ensure a proper fit, I would try to find a factory bench seat from a '60-'66 Chevy/GMC truck, to be sure. Also, there two different seats available...standard and Custom Comfort, which has thicker padding & fill.
I found one for free on craigs list in my area a few months ago. Check your local area and you may find a '60-'66 Chevy/GMC one for less than $50.00. I have had several reupholstered and I believe them to be a good quality, fit and finish for these trucks. Good luck. | | |
|
|
| |
