| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,076 Posts1,055,924 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2009 Posts: 34 Apprentice | | Apprentice Joined: Sep 2009 Posts: 34 | I've seen post on Burbs and how you cant get the floor out in one piece.
Whats the story on Panels ?
Looks like a jigsaw puzzle how it all seems to be overlapped.
I tried search but I rarely have any luck with the search feature here (?)
Anyone refer me to post on this topic?
Thanks ! | | | | | Joined: Sep 2009 Posts: 34 Apprentice | | Apprentice Joined: Sep 2009 Posts: 34 | O.K. I was using the wrong search, my bad ! I'll dig around.  | | | | | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 |
I do not think that you will get the 1949 Panel rear floor boards out in one piece.
In 1950, "the floor boards of panel and canopy express models were changed to plywood construction. In the new construction a single panel of wood and five skid strips replaced thirteen floor boards and twelve skid strips."
| | | | | Joined: Oct 2004 Posts: 1,780 Master Gabster | | Master Gabster Joined: Oct 2004 Posts: 1,780 | I do not think that you will get the 1949 Panel rear floor boards out in one piece.
In 1950, "the floor boards of panel and canopy express models were changed to plywood construction. In the new construction a single panel of wood and five skid strips replaced thirteen floor boards and twelve skid strips." Tim, wouldn't that make the 1949 panel have the individual planks? Are the individual planks installed in such a way that they cannot be removed either? Are the planks tongue and groove? | | | | | | ZooKeeper Unregistered | | ZooKeeper Unregistered | I do not think that you will get the 1949 Panel rear floor boards out in one piece.
In 1950, "the floor boards of panel and canopy express models were changed to plywood construction. In the new construction a single panel of wood and five skid strips replaced thirteen floor boards and twelve skid strips." Tim, wouldn't that make the 1949 panel have the individual planks? Are the individual planks installed in such a way that they cannot be removed either? Are the planks tongue and groove? They can be removed by removing the retaining strips front/rear and unbolting the metal strips from the x-braces. BUT the ones up against the walls are just like the plywood. They are under the body lip inside the panel body. You're going to have to lift the body up off of them. But would need to put some kind of support the same thickness of the stock planks at the very back near the doors....Joe | | |
|
|
| |
