The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
3 members (JW51, tesa, Ponchogl), 49 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,076
Posts1,055,925
Members48,430
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#599709 12/09/2009 4:43 PM
Joined: Oct 2009
Posts: 105
B
Wrench Fetcher
Wrench Fetcher
B Offline
Joined: Oct 2009
Posts: 105
I'm the proud owner of a 1954 chevy 3100. I got it 2 nights ago in KC MO before the bad weather hit. I will try to get some pictures on here when I figure out how.

I'm wanting to convert to 12 volt and not sure where to start. I want to keep the foot starter. My wiper motor isn't working so thinking about switching to 12 electrical. The defrost bearly got me home so planning on installing a heater and defroster assembly in 12 volt. Speedo and odometer don't work. get rebuild?? This is going to be an everyday driver pulling a small trailer hauling carpet for installing. My ranger's tranny or clutch is about to crap out on me. So I was hoping some of you guys could help me out.

Joined: Jun 2004
Posts: 8,597
W
Riding in the Passing Lane
Riding in the Passing Lane
W Offline
Joined: Jun 2004
Posts: 8,597
The starter will be fine. Get an alt. & bracket kit. Put a Runtz resister on the fuel gauge. Change all the bulbs to 12 v. You already solved the wiper & heater part. That's about it but its pretty general. If you need help with the alt. circuit put another post in. A lot of people use the 1 wire alt for simplicity, but I still like the 3 wire w/int. reg. Don't get a high powered alt. About 55-65 amp tops. You can still use your original amp. meter with it. Besides the belt won't pull any more then that.
We are lucky here in K.C. area. We have 3 of the best parts places here in town.

Last edited by Wrenchbender Ret.; 12/09/2009 5:40 PM.

They say money can't buy happiness. It can buy old Chevy trucks though. Same thing.
1972 Chevy c10 Cheyenne Super
In the Gallery Forum
Joined: Dec 2006
Posts: 1,464
W
Shop Shark
Shop Shark
W Offline
Joined: Dec 2006
Posts: 1,464
Congrats on the "new" truck and welcome to the 'bolt!

Just click on the techtips link at the top of the page here and look for the step-by-step procedure laid out there.

Joined: Oct 2009
Posts: 105
B
Wrench Fetcher
Wrench Fetcher
B Offline
Joined: Oct 2009
Posts: 105
what does a alternator offer me over installing a 12 generator?

Joined: Jun 2004
Posts: 8,597
W
Riding in the Passing Lane
Riding in the Passing Lane
W Offline
Joined: Jun 2004
Posts: 8,597
If you are going to use it regularly the alt. is the best way to go. It puts out more total amps. but mainly it puts out more at idle & slow speeds. The 1 wire is easy to hook up but the 3 wire system has better control. An alt. is more dependable & lasts much longer then a gen.


They say money can't buy happiness. It can buy old Chevy trucks though. Same thing.
1972 Chevy c10 Cheyenne Super
In the Gallery Forum

Moderated by  Jon G, Rusty Rod 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0