| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,056 Posts1,055,792 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2009 Posts: 232 Shop Shark | | Shop Shark Joined: Apr 2009 Posts: 232 | made an error in my previous post by incorrectly refering to the clutch disc as the "pressure plate". (lack of sleep or old age). anyway the disc isn't marked "flywheel side" so I installed it with the high cone of the center spline toward the flywheel. I think this is correct but am looking for some reassurance. | | | | | Joined: Sep 2009 Posts: 66 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2009 Posts: 66 | The higher cone side of your clutch disc should face the flywheel. I believe it will lay flat on the flywheel facing either direction, but if the high side is facing the transmission it will hit the diaphragm spring in the pressure plate assembly and it won't fit together, so your only option is to have the high side face the flywheel as you suggested. | | |
|
|
| |
