The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
3 members (dt235sd, Tom McGrath, 55shaker), 94 guests, and 1 robot.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,073
Posts1,055,908
Members48,429
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#56051 02/04/2006 9:14 PM
Joined: Dec 2005
Posts: 112
B
Member
Member
B Offline
Joined: Dec 2005
Posts: 112
I'm need'n to know about a part that I left out on my front end,it's the paper thin washers that sit on top of the bearing that the kingpin slides thru to conect the spindle to the upright?(I hope this makes since,kinda hard to explain without pix.)anyway I'm hope'n they are not an extremely
impotant part,but I'm sure they have a roll to play or they wouldnt have been in the kit,maybe just a cover for the ball bearings so they dont get dirt or debree in them?Just try"n to get some info to see if running with out the washers will be ok,I dread have'n to borrow a shop again to tear the frontend completely apart just to put two paper thin washers in.


1949 Styleline Special
1972 K5 Blazer
#56052 02/04/2006 10:40 PM
Joined: Jun 2004
Posts: 8,597
W
Riding in the Passing Lane
Riding in the Passing Lane
W Offline
Joined: Jun 2004
Posts: 8,597
They are shims to take up any play up & down in the spindle. They go in the top of the axle with the thrust brg on the bottom. If you have a small amount of play it will be all right. If there is a lot of movement it will be nessesary to tear it down again.


They say money can't buy happiness. It can buy old Chevy trucks though. Same thing.
1972 Chevy c10 Cheyenne Super
In the Gallery Forum
#56053 02/04/2006 11:16 PM
Joined: Dec 2005
Posts: 112
B
Member
Member
B Offline
Joined: Dec 2005
Posts: 112
10-4,thanx for the info,hardly any slack at all so I'm gonna run it like it is for a while.thanx again!


1949 Styleline Special
1972 K5 Blazer

Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0