| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
7 members (Hanks custodian, Otto Skorzeny, Maybellene, baldeagle, Hotrod Lincoln, Bill Marlow, 1 invisible),
53
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,006 Posts1,055,268 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2008 Posts: 98 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2008 Posts: 98 | i just started spraying primer on my truck...never painted before yup,,i'm a beginner . i am spraying nason etch primer on bare metal body, and i noticed stringy primer flying when i spray. i mixed it 1 to 1 like it says, air pressure at the gun 35-40 (gravity feed) any ideas what causes this? thanks..Mark | | | | | Joined: Oct 2008 Posts: 283 Shop Shark | | Shop Shark Joined: Oct 2008 Posts: 283 | Is the gun clean? Especially the end nozzle? | | | | | Joined: Nov 2007 Posts: 80 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2007 Posts: 80 | Sounds to me like your primer may be a bit too thick.
Back in the 60s cobwebbing was popular for custom painting,the cobwebbing effect was achieved by spraying super thick lacquer at a low pressure.
Try adding a dash of urethane reducer and increase your pressure.
Wally | | | | | Joined: Sep 2007 Posts: 2,644 Shop Shark | | Shop Shark Joined: Sep 2007 Posts: 2,644 | Paint's too thick. I use that same primer in a el-cheapo HVLP gun, mixed according to instructions and don't have a problem. | | | | | Joined: Nov 2008 Posts: 98 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2008 Posts: 98 | thanks for the help guys...i will add a bit more thinner and see how it goes. Mark | | |
|
|
| |
