The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
3 members (Otto Skorzeny, MNSmith, Gray_Ghost), 63 guests, and 1 robot.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,057
Posts1,055,812
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#53693 12/16/2005 9:05 PM
Joined: Apr 2005
Posts: 72
5
Wrench Fetcher
Wrench Fetcher
5 Offline
Joined: Apr 2005
Posts: 72
What is a good after market, single carburetor, two barrel, to put on a 235 motor to increase power and efficiency? Or is it even worth replacing a stock single barrel carb? I see they make an adapter plate to put a Weber 32/34 on a stock intake. What other options are out there that are reasonable? I don’t want to sink $1000 in after market parts to get a little improvement (dual exhaust, exhaust pipes and mufflers, dual intake, dual carbs, HEI ignition). If I spend that much money I feel switching to a V8 would get me more power for the money.

I just want a little improvement, efficiency and response. I thought an after market carburetor might help a little. Let me know what you have experienced and what you have done.

Thanks again.


If you didn’t skin a knuckle while you were working on your truck, you weren’t working hard enough!

53 5window 1/2 ton
54 3window 1/2 ton
#53694 12/16/2005 10:50 PM
Joined: Nov 2002
Posts: 2,765
C
Carburetion specialist
Carburetion specialist
C Offline
Joined: Nov 2002
Posts: 2,765
Two things: (1) if your stock carburetor is functioning well; and (2) you make no other changes, then a carburetor change through the existing manifold is going to be of little or no help.

If your carburetor is a typical Rochester B functioning poorly, then replacing it with a Carter would be a decent upgrade. However, the Carter will provide little (maybe a few percent) benefit over the stock carb IF the stock carb is functioning properly.

Those who experience large benefits from a carburetor change and no other changes simply a malfuncting carburetor with one that would function.

Jon.


Good carburetion is fuelish hot air
The most expensive carburetor is the wrong one you attempt to modify.
If you truly believe "one size fits all," try walking a mile in your spouse's shoes!
The Carburetor Shop

Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0