| |
Click on image for the lowdown. 
====
| | |
9 members (3B, Johnny Rib, baldeagle, 68ironhead, 2-Ton, 1955 1 Series, JW51, Guitplayer, walter74),
108
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,038 Posts1,055,471 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2009 Posts: 11 Apprentice | | Apprentice Joined: Mar 2009 Posts: 11 | Hi all, new bolter here, looking for a quick measurement from anyone that might have a truck and a tape measure handy. I have a 53 GMC, it's sitting on an S10 frame, and I'm looking for a measurement for the height of the bed. Maybe from the bottom of the back window on the cab to the top of the front panel on the box. I have a feeling I've mounted the cab too low to put the bed at stock height and be able to clear everything, but it'd just be nice to know where it's supposed to be before I do anything permanent. | | | | | Joined: Oct 2006 Posts: 4,983 Master Gabster | | Master Gabster Joined: Oct 2006 Posts: 4,983 | You might get more and better answers over at the HI PO forum; that's where the S-10 guys hang out.
~Jim
| | | | | Joined: Mar 2009 Posts: 11 Apprentice | | Apprentice Joined: Mar 2009 Posts: 11 | I was actually hoping to get the original stock height off a stock truck. I know I'm going to have to change from the original, but I'd like to keep the exterior of this truck as stock looking as possible, so I'm trying hard to make things fit like original where I can. | | | | | Joined: Apr 2004 Posts: 888 'Bolter | | 'Bolter Joined: Apr 2004 Posts: 888 | Check with KC Mongo, a bolter here. at his website. He has a lot of info. Welcome to the site. Have fun and good luck Dan
Last edited by Chev4t6; 03/31/2009 3:48 PM.
| | |
|
|
| |
