| |
Click on image for the lowdown. 
====
| | |
8 members (78buckshot, Woodcmiami, cmayna, Hotrod Lincoln, Gdads51, mick53, MickeyP, 1 invisible),
38
guests, and
10
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,012 Posts1,055,312 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#50920 10/07/2005 2:12 PM | Joined: Sep 2004 Posts: 14 Junior Member | | Junior Member Joined: Sep 2004 Posts: 14 | Can someone shoot me the correct point gap/dwell for a 1/2 ton with a 250L?
Thanks,
Mike | | |
#50921 10/07/2005 10:09 PM | Joined: Jul 2004 Posts: 5,708 'Bolter | | 'Bolter Joined: Jul 2004 Posts: 5,708 | Mike,
This info was in this forum several weeks ago....just did a "search".
'66 Pickemup truck 250c.i.
AC 46-N spark plug @.035 gap
Point Gap: .019 dwell 31-34 degrees
Timing is 6 deg BTDC
Hot idle speed: standard 500 RPM
Automatic: 'As low as possible to obtain smooth idle and prevent creep in Drive or harsh shifts.'
Idle speed depends on whether or not you have the A.I.R. (smog pump) system.
Stuart. | | |
#50922 10/08/2005 2:47 PM | Joined: Sep 2004 Posts: 14 Junior Member | | Junior Member Joined: Sep 2004 Posts: 14 | atomarc,
Thanks for the info. I had done a search but did not find that post.
Mike | | |
|
|
| |
