| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,014 Posts1,055,327 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2008 Posts: 5 New Guy | | New Guy Joined: May 2008 Posts: 5 | What is the best method for removing the old rivets out of the frame,got one out somehow, but the other one cut the head off and even heated the hell out of it and it still wont come out even with an air hammer and a punch, this sucks
| | | | | Joined: Dec 2007 Posts: 96 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2007 Posts: 96 | This has been discussed a lot. Try searching the old posts. What worked for me was grinding off the head, center punch, drill about halfway through with a 1/4" diameter bit, then punch out with a punch and BFH. I do not have an air chisel, but other here have spoken well of their use. | | | | | Joined: Jul 2005 Posts: 2,031 Shop Shark | | Shop Shark Joined: Jul 2005 Posts: 2,031 | compressor w/ airjack & Y bit
or grind it and punch out the remainder w/ a punch.
Last edited by carolines truck; 12/30/2008 3:50 AM.
Jim & Caroline
The highway is for gamblers, better use your good sense."
Gooday-that's my 1¢ answer due to the lousy economy ~ cause I ain't got - no . mo . doe
Every Shaver | Now Can Snore | Six More Minutes | Than Before ... | Half A Pound for Half a Dollar | Spread On Thin | Above the Collar || BURMA-SHAVE
| | | | | Joined: May 2005 Posts: 8,878 . | | . Joined: May 2005 Posts: 8,878 | | | | | | Joined: May 2001 Posts: 7,438 Extreme Gabster | | Extreme Gabster Joined: May 2001 Posts: 7,438 | Yes this horse was beaten to death recently. I see no need for another thread on it. | | |
|
|
| |
