| |
Click on image for the lowdown. 
====
| | |
0 members (),
90
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,031 Posts1,055,434 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2008 Posts: 125 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2008 Posts: 125 | I have a buddy that'll give me his power steering ram and control from his '64 GMC. I am wondering if I could use it in my '62. I looked at it, and it appears that the ram mounts into the draglink, and the valve is integral to the drag link as well. My question is, is it possible to replace my '62 1/2 ton Chevy drag link with his '64 3/4 Gmc drag link? If so I will have a quick easy and cheap P/S setup!
Who is John Galt?
| | | | | Joined: Apr 2005 Posts: 2,097 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 2,097 | GM used that system from 60 through 66 on Chevy and GMC trucks. However there were changes in the front suspension and steering in 63. If everything measures the same it should probably work.
Fred
1956 3100 Pickup/Red/350/3sp OD/PS/Disc Brakes
1957 Bel Air Sport Coupe/Red/355/TH350/PS/Disc Brakes
2017 Silverado LT Single Cab SB/Black/5.3/6 Speed Trans
1947 Willys CJ2A w/F-Head engine
| | |
|
|
| |
