| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,043 Posts1,055,615 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2008 Posts: 12 New Guy | | New Guy Joined: Nov 2008 Posts: 12 | I have a 66 c10 1/2 ton 2 wheel drive that I just acquired and I plan to restore. I am not familiar with pickups so I dont know where to look for a copy of the build sheet. I do know that they sometimes put them behind the seat but I have looked there and it has either been removed or the stuck it somewhere else when this one went down the line. Can anybody else give me any ideas where it might be Thanks Chris | | | | | Joined: Oct 2006 Posts: 4,983 Master Gabster | | Master Gabster Joined: Oct 2006 Posts: 4,983 | Somewhere 35 feet under the local landfill.
Welcome to the Bolt. Your truck has had 42 years to lose the build order, it was probably gone the first decade.
~Jim
| | | | | Joined: Sep 2005 Posts: 2 New Guy | | New Guy Joined: Sep 2005 Posts: 2 | Hello Chris, when I bought my 1967 GMC pickup a few years ago, I found two build sheets in the truck. One was behind the seat, and one was under the seat. They were held in place with the wiring to the seat. I was told you could get that and other info from the GM historical society, however I got nowhere with that route. Good Luck! | | | | | Joined: Mar 2007 Posts: 4,215 Moderator | | Moderator Joined: Mar 2007 Posts: 4,215 | I've heard that they often stuck them in the seats. In Canada, it's much easier to obtain build sheets from GM than in the US, I'm told. I have one for my '69 Chevelle, just had to send them $40. | | |
|
|
| |
