| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,191 Posts1,057,348 Members48,469 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2006 Posts: 243 Shop Shark | | Shop Shark Joined: Jul 2006 Posts: 243 | guys, im looking at a 1948 single wheel long wheel base 1 ton truck on craigslist, question is whats the "total" length from bumper to bumper of this truck? has to fit inside my garage, thanks
Last edited by dbone; 09/18/2008 8:24 PM. Reason: spelling
| | | | | Joined: Jan 2008 Posts: 4,963 'Bolter | | 'Bolter Joined: Jan 2008 Posts: 4,963 | Figure on 18 1/2 to 19 foot, bumper to bumper, depending on what kind of trailer hitch or back bumper it has. I see you are in Dripping Springs. I am in Fredericksburg and I have a daughter in Lakeway. I notice there is a pickup like you describe in Ledbetter. I would go look at it with a tape measure and cash in hand if you're interested. Cash talks these days and Ledbetter is not that far and not too bad a drive taking 71 to Bastrop, 21 to 290 and 290 to Ledbetter.
Last edited by crenwelge; 09/18/2008 9:20 PM.
| | | | | Joined: May 2005 Posts: 8,878 . | | . Joined: May 2005 Posts: 8,878 | 18.5 to 19' sounds right to me as well.
If you need a more exact answer I'll go measure mine?
Grigg | | | | | Joined: Nov 1995 Posts: 5,746 24601 | | 24601 Joined: Nov 1995 Posts: 5,746 | Grigg,
The dealer data book shows 221.5 inches but that's without the rear bumper installed. The 1-ton panel has a rear bumper installed as shows 227 5/8 inches -- probably the same for a 3804 with a rear bumper.
John
~ John A kid raised on Hotwheels, Matchbox and Tonka cannot be reasonably expected to own only one vehicle as an adult. 1949 Chevrolet 3804In the Legacy Gallery | In the Gallery Forum1973 IH 1310 Dump1963 Kaiser M38A12001 International/AmTran RE3000 "Skoolie"2014 Ford E-350 4x4 (Quigley) | | | | | Joined: May 2005 Posts: 8,878 . | | . Joined: May 2005 Posts: 8,878 | I don't think a rear bumper was standard on the 1 ton pickup, was it even an option, or just something folks put on later?
Mine does not, and best I can tell, never had a rear bumper.
Grigg | | | | | Joined: Jan 2008 Posts: 4,963 'Bolter | | 'Bolter Joined: Jan 2008 Posts: 4,963 | Rear bumpers were accessories. They were similar to the front, but the bend was not as sharp. I have one my father took off a 50 GMC a day or 2 after he bought it. I know they were offered for 1/2 and 3/4 ton GMC. I'm not sure about 1 ton. However few people used the bumper. The tail gate would not drop all the way down and they were not strong enough for a trailer hitch. Most bumpers were after market. | | |
|
|
| |
