| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,087 Posts1,056,114 Members48,435 | | Most Online14,466
Apr 26th, 2026 |
| AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#39719 03/04/2005 10:26 PM | Joined: Jan 2001 Posts: 142 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2001 Posts: 142 | Anybody know what the specs are for the pressure plate to flywheel? I have a GMC 228. | | |
#39720 03/05/2005 3:06 AM | Joined: May 2001 Posts: 7,438 Extreme Gabster | | Extreme Gabster Joined: May 2001 Posts: 7,438 | I couldn't find a torque value in my GMC maintenance manual. All I could find is "...tighten gradually one turn at a time to compress spring evenly and prevent possible distortion of cover flange. Remove aligning arbor when bolts are tight."
In my Chevy manual it is listed at 45-55 ft/lb. | | |
#39721 03/05/2005 3:59 AM | Joined: Sep 2003 Posts: 2,384 Shop Shark | | Shop Shark Joined: Sep 2003 Posts: 2,384 | The only time I tried torquing clutch cover bolts I broke them off, I use a combination wrench about 5-6 inches long & my calibrated elbow(about as tight as you can get them w/said wrench). Make sure to tighten evenly as Cletis said. Brian | | |
|
|
| |
