| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,087 Posts1,055,976 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#39524 03/29/2003 5:07 AM | Joined: May 2002 Posts: 23 'Bolter | | 'Bolter Joined: May 2002 Posts: 23 | I recently installed a saginaw 2-groove 4-spd in my 51 chevy 235. the slip joint on the tail shaft and the tail shaft have finer grooves than the three speed did and I couldn't use the slip joint from the 3-speed and the one on the 4-speed looked like it had the clutch popped on it one to many times as the splined grooves in the slip-joint were slightly twisted and made it hard to get the slip-joint all the way on the transmission tail shaft!! I did get it on and it works OK but I would like to get a new one. question to ya'll is where do I find a new slip joint??? Thank you.. AG-Pilot | | |
#39525 03/29/2003 7:37 AM | Joined: Jul 2001 Posts: 3,887 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Jul 2001 Posts: 3,887 | check the wreckin yards for GM trucks after about 67 or 68 - just get the yoke and put on yer shaft w/ new cross - worked for me
Bill | | |
#39526 03/29/2003 9:24 PM | Joined: Mar 2001 Posts: 316 Member | | Member Joined: Mar 2001 Posts: 316 | Even a yoke from a TH-350 will work; same yoke   . Should be an easy one to find in the "pull-your-part" yards.
*** GMC ***
| | |
|
|
| |
