Click on image for the lowdown. 
====
| | | Forums66 Topics128,076 Posts1,055,924 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#39431 07/23/2002 9:43 PM | Joined: May 2000 Posts: 52 Member | | Member Joined: May 2000 Posts: 52 | I would like to see as many pics of nicely done up inlines as possible. So if you guys don't mind posting a pic or 2, it would be much appreciated.
Many Thanks | | |
#39433 07/23/2002 10:35 PM | Joined: Mar 2001 Posts: 265 Shop Shark | | Shop Shark Joined: Mar 2001 Posts: 265 | dubie:
I posted pictures of my 216 out of my 53 3100 the first part of the month in the Lounge. If you would like to take a look at them, they are on page 4 of the Lounge, close to the bottom. Title of the post is "Engine pictures". I hope this will help.
Rugo
53 3100
Smokem if you gottem, if you haven't gottem, I know where you can gettem.
Steve Rugg
53 3100
| | |
#39435 07/23/2002 11:17 PM | Joined: Jul 2000 Posts: 504 Member | | Member Joined: Jul 2000 Posts: 504 | There are a couple of shots of my engine on my home page. Click here.
Bill M
53 GMC Hydra-Matic
Home Page
http://home.comcast.net/~bd97/index.html
When you argue with a fool, two fools are arguing..
| | |
#39436 07/23/2002 11:23 PM | Joined: Jul 2002 Posts: 13 Junior Member | | Junior Member Joined: Jul 2002 Posts: 13 | Hi Dubie,
I found your thread....thanks. Wow, those look really great. I finally decided to keep the engine and chrome it out. Maybe I'll make a rasta beanie like tclederman. lol
jay | | |
#39437 07/24/2002 1:29 PM | Joined: Jul 2002 Posts: 358 Shop Shark | | Shop Shark Joined: Jul 2002 Posts: 358 | Tclederman,
that's the one I want for Christmas...
Fenton's and twin carbs.
Are you satisfied with the setup?
whizzerick | | |
#39439 07/24/2002 4:29 PM | Joined: Mar 2000 Posts: 73 Wrench Fetcher | | Wrench Fetcher Joined: Mar 2000 Posts: 73 | This is an early shot of Lucy's 55 235. The web page is not complete yet but I have a few before shots in place now. http://www.softcom.net/users/rlrick/ENGINE32.jpg . Rick 46 1/2 ton | | |
#39440 07/24/2002 6:14 PM | Joined: May 2002 Posts: 44 'Bolter | | 'Bolter Joined: May 2002 Posts: 44 | Oly,
Can I e-mail you some pics of the 302 in the '52 1/2 ton? I just got it out on the road today for the first time since rebuild. Very exciting!
"The Operation of GMC trucks is normally smooth and steady, with no loud rattling, knocking or unusual noises. A good driver will quickly become accustomed to driving a GMC truck and will get the feel of his vehicle regardless of his engineering knowledge."-TM10-1563
| | |
#39441 07/24/2002 9:17 PM | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | Oly,
What am I doing wrong with pictures? I put the exact same link (URL) in the Instant UBB Code dialog box and nothing displays in the message (no picture, no address or odd letters, and no error message). I inserted the same address/URL into the message and the link shows up fine.
The UBB code is something like:
[img] URL [/img]
Thanks for posting the pictures.
Squeeze cleaned up (reduced) the picture of the suburban that was so large. Thanks squeeze.
Tim | | |
#39442 07/24/2002 10:13 PM | Joined: Mar 2001 Posts: 327 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Mar 2001 Posts: 327 | Tim, since you have your pics on a web site- just get your image on the screen andleft click on it and go to properties and copy that address- the to post go to UBB and go to image- paste the copied URL in the box.
52GMC6, Feel free to send me your pictures. I usually link pics but that will be fine. Would sure enjoy seeing them as I'm certain others would also.
Oly in Oregon Rest in Peace1945 GMC COE Victory Truck 1953 Willys CJ3B 1955 Chevy 1st series 3/4-ton 1958 WIFE Last series Never say "Whoa" in a mud hole
| | |
#39443 07/24/2002 10:41 PM | Joined: Feb 2001 Posts: 1,096 'Bolter | | 'Bolter Joined: Feb 2001 Posts: 1,096 | If the pic doesn't work , you can view the album at http://www.picturetrail.com/dusty2790 [img]http://pic4.picturetrail.com:80/VOL50/482254/625053/11752887.ptp[/img] | | |
#39445 07/25/2002 12:54 AM | Joined: Mar 2001 Posts: 1,181 'Bolter | | 'Bolter Joined: Mar 2001 Posts: 1,181 | | | |
#39446 07/25/2002 2:50 AM | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | Tony,
Wendell is usually held when we go on vacation to visit our families in VA. One year I hope to go to the Wendell gathering. The 261 challenge race should be interesting - will you be participating?
I am going to miss reading the annual Wendell story in Pickups and Panels in Print.
Sure is a nice family of engines you posted. What's the story about the coil in the 216?
Tim | | |
#39447 07/25/2002 2:55 AM | Joined: Mar 2001 Posts: 21 Shop Shark | | Shop Shark Joined: Mar 2001 Posts: 21 | Here is our rare 1945 GMC 308 6 cylinder gas engine, this is not pretty but I am still searching the web for parts to restore it with. It sure does need TLC. 1945 GMC 308 6 cly gas engine After posting this, I went out and searched again I finally found a place in Spokane Washington that will rebuild this engine and soon as it is done I will post another picture for all to see. This is so cool.
Times are changing-By Bob Dylan
Cindy in Oregon
1945 GMC COE Victory Truck 5ton COE- NOT FOR SALE
1955 Chevy First series 5 window p/u
1947 Antique Husband only series
| | |
#39448 07/25/2002 2:55 AM | Joined: Jan 2002 Posts: 398 Member | | Member Joined: Jan 2002 Posts: 398 | Hey Tim, nice easy question for you-what is the name of the color on that 'burb? Is that Mariner Blue? It's gorgeous! TIA Wannabe 
"Don't expect anything and you'll never be disappointed"
| | |
#39449 07/25/2002 4:37 AM | Joined: Jul 2001 Posts: 3,887 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Jul 2001 Posts: 3,887 | ok - here's a CDN 57 235 from a panel, reborn in a pu - not rebuilt, just cleaned up for the first time in its long life - about 75,000 orig miles. Bill [ps: welcome tim] | | |
#39450 07/25/2002 11:01 AM | Joined: Jan 2000 Posts: 1,586 Extreme Gabster | | Extreme Gabster Joined: Jan 2000 Posts: 1,586 | Tim, the only challange I got so far is from Bill and his 270 powered 53 GMC, a fearless man.
The 216 coil? I wanted to pull the distributor, so I just twisted the coil around for clearance.
Nice alloy covered 261 in your truck. | | |
#39452 07/25/2002 12:56 PM | Joined: Oct 2000 Posts: 98 'Bolter | | 'Bolter Joined: Oct 2000 Posts: 98 | Here is a link where I have a couple pictures of my 250 in my 1966 Chevy. Just cleaned it up and painted it. truck homepage This is the first time I have tried to do this. I hope it works.
Mike Kelley
1966 Chevy C10 SWB - 250 L6/S10 T5
2002 Chevy Ext 1500 4x4
Http://myol66.wordpress.com
| | |
#39453 07/25/2002 2:50 PM | Joined: May 2002 Posts: 44 'Bolter | | 'Bolter Joined: May 2002 Posts: 44 | Well, I think I got this picture link thing figured out Here is the stock GMC 302 that has been in the works for the past year or so. The engine is now in my '52 GMC 1/2ton LB. Drove the truck for the first time yesterday to work and back. With the M-420 4 speed and the 3:54 Dana 60 rearend, the engine seems real happy even at 60 mph. I need to get some pics of the engine in the truck but here are some for now.......... [img] http://community.webshots.com/storage/1/v4/5/82/53/44758253RBpaqv_th.jpg[/img] This link has more "shop" pics: http://community.webshots.com/user/52gmc6
"The Operation of GMC trucks is normally smooth and steady, with no loud rattling, knocking or unusual noises. A good driver will quickly become accustomed to driving a GMC truck and will get the feel of his vehicle regardless of his engineering knowledge."-TM10-1563
| | |
#39455 07/25/2002 6:07 PM | Joined: Nov 2000 Posts: 427 'Bolter | | 'Bolter Joined: Nov 2000 Posts: 427 | WOW 52GMC6! What a sweet lookin' motor. I love the chrome on the rocker cover. That's just great. Nice job. Also curious about the oil filter conversion. I like the look and it's clean but it looks like it's not plumbed up yet?? I looked around found that I don't have any recent photos of my motor. It's still unrestored, but I have cleaned up the motor compartment quite a bit since this photo was take, but basically, it still looks the same except for hoses, wires, etc. Original 228 | | |
#39456 07/25/2002 7:04 PM | Joined: Jul 2002 Posts: 13 Junior Member | | Junior Member Joined: Jul 2002 Posts: 13 | I see Fenton is the header of choice here. How do they compare to the clifford performance headers and where can I find Fentons?
jay | | |
#39457 07/26/2002 3:19 AM | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | Wannabe,
You're right, the '54 suburban is Mariner Blue with Pulsar Gray interior. PPG was able to match all colors (including Thistle Gray for inner grill bars, Anvil Gray for bumpers, and Maroon for seat frames and side panel frames). Can't wait to drive it again.
Dubie,
Nice topic. It's a treat to look at everyone's handiwork.
Tim | | |
#39458 07/26/2002 1:12 PM | Joined: May 2002 Posts: 44 'Bolter | | 'Bolter Joined: May 2002 Posts: 44 | Kook, I posted some more pics of the 302 here: http://community.webshots.com/user/52gmc6 There should be one in there of the plumbing for the full flow filter setup. I like having it down low as the generator sort of hides the filter adapter and reaching the filter for oil changes is still easy. Nice shot of the 228. I assume that this gem lives in the Huckster? Anyone else have more GMC's?????????????? A very enjoyable topic!!!!!!!!! Pictures speak a thousand words.
"The Operation of GMC trucks is normally smooth and steady, with no loud rattling, knocking or unusual noises. A good driver will quickly become accustomed to driving a GMC truck and will get the feel of his vehicle regardless of his engineering knowledge."-TM10-1563
| | |
#39459 07/26/2002 7:33 PM | Joined: Jul 2002 Posts: 13 Junior Member | | Junior Member Joined: Jul 2002 Posts: 13 | 52gmc...that is beautiful.
jay | | |
#39460 07/27/2002 1:05 AM | Joined: Jan 2000 Posts: 206 Member | | Member Joined: Jan 2000 Posts: 206 | This engine is actually about ready to go in my truck. Sixpack 302 I will post more once it's on the road. | | |
#39461 07/27/2002 3:27 AM | Joined: Jul 2002 Posts: 358 Shop Shark | | Shop Shark Joined: Jul 2002 Posts: 358 | Here's my new truck. The engine bay is still oily and crusty... I THINK it is a 235 Loadmaster (it has been replaced). Plans include headers and twin carbs, because they look darn funky-nice! www.whizzerick.com | | |
#39462 07/27/2002 5:41 AM | | Anonymous Unregistered | | Anonymous Unregistered | Hey Whiz, very cool foundry work! No end of fun with that kind of stuff. | | |
#39463 07/27/2002 7:03 PM | Joined: Feb 2001 Posts: 198 Shop Shark | | Shop Shark Joined: Feb 2001 Posts: 198 | As Fatfenders knows, my truck ain't no screamin' hell, but I like it. And since I had just finished spray bomb...umm repainting my aircleaner, I thought I would add my 3 cents to this great post! (Well done Dubie). top view driver\'s side other side As you can see it could use a good cleaning, but then again so could the rust, uh, rest of the truck!!
Attitude - The difference between an adventure and an ordeal!
Deja Moo - The feeling you've heard this bull**** before!
'63 Chev Fleetside Longbox 'Rusto-rod' 'Big Red'
'69 or'70 or ? Mantaray DuneBuggy
| | |
#39464 07/27/2002 10:26 PM | Joined: Sep 2000 Posts: 390 Shop Shark | | Shop Shark Joined: Sep 2000 Posts: 390 |
1942 1\2 Ton 1951 1\2 Ton 55 willys cj-5 1954 and 59 Cushman Scooter 1960 Biscayne Sedan 1965 G/10 panel van 1966 C/30 Grizzly Motorhome You know you're a 'Bolter when your daily driver is older than you are... My progress pics | | |
#39465 07/28/2002 3:17 AM | Joined: Mar 2001 Posts: 316 Member | | Member Joined: Mar 2001 Posts: 316 | Sixpack, love your motor!   Here is my old greasy 248 beast, with a fresh head put on about twenty years ago. Photo is 5 years old. [img] http://www.directcon.net/gmc248/truck7.jpg[/img]
*** GMC ***
| | |
#39466 07/28/2002 4:55 AM | Joined: Jul 2002 Posts: 13 Junior Member | | Junior Member Joined: Jul 2002 Posts: 13 | Freedo,
It says to log in to see the pics.
jay | | |
#39467 07/28/2002 9:49 AM | Joined: Feb 2001 Posts: 198 Shop Shark | | Shop Shark Joined: Feb 2001 Posts: 198 | Jeez...it works just fine for me...I'll try posting the pics here....
[img]http://www.msnusers.com/acpngi6ubdjpoiv6d045kfo3g6/Documents/Pictures%2FIM000760.jpg[/img]
[img]http://www.msnusers.com/acpngi6ubdjpoiv6d045kfo3g6/Documents/Pictures%2FIM000762.jpg[/img]
[img]http://www.msnusers.com/acpngi6ubdjpoiv6d045kfo3g6/Documents/Pictures%2FIM000763.jpg[/img]
Attitude - The difference between an adventure and an ordeal!
Deja Moo - The feeling you've heard this bull**** before!
'63 Chev Fleetside Longbox 'Rusto-rod' 'Big Red'
'69 or'70 or ? Mantaray DuneBuggy
| | |
#39468 07/28/2002 4:33 PM | Joined: Dec 2001 Posts: 1,745 Member | | Member Joined: Dec 2001 Posts: 1,745 | It don't work. You need to put your pics somewhere else.
54 3100 with 235
62 flatbed dump C60 with 261
| | |
#39469 07/28/2002 11:02 PM | Joined: Feb 2001 Posts: 198 Shop Shark | | Shop Shark Joined: Feb 2001 Posts: 198 | OK what gives? I can see eveything I posted just fine, but obviously others can't. I'm using MSN's 'My Web Documents' what am I doing wrong?
Also I get an error message sometimes when I've been tried to post and the computor is returning me to the post topic page.
Help!!
Attitude - The difference between an adventure and an ordeal!
Deja Moo - The feeling you've heard this bull**** before!
'63 Chev Fleetside Longbox 'Rusto-rod' 'Big Red'
'69 or'70 or ? Mantaray DuneBuggy
| | |
#39470 07/29/2002 4:23 AM | Joined: Jul 2001 Posts: 3,887 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Jul 2001 Posts: 3,887 | you can see'em because you're logged in to MSN and your cookie sez "lemme see'em". we got no cookies - doc sez lay off'em. you'll have to find how MSN allows linking to your stuff so others can access it. or you might be using the wrong link technique. right click the pic ya see there, and select something like "copy image address", or "image properties" will give ya an address ya can highlite and copy.
Bill | | |
|
|
