| |
Click on image for the lowdown. 
====
| | |
2 members (dt235sd, Jon G),
50
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,021 Posts1,055,372 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#36016 10/14/2004 1:29 PM | Joined: May 2004 Posts: 105 'Bolter | | 'Bolter Joined: May 2004 Posts: 105 | Is a 4spd out of a 50's 1/2 ton the same as my 4spd in my 1950 3/4 ton? | | |
#36017 10/14/2004 2:02 PM | Joined: May 2003 Posts: 213 'Bolter | | 'Bolter Joined: May 2003 Posts: 213 | It should be. I've seen the same tranny in the 1/2 ton to the 2 1/2 ton. If it is a 216 or 235, odds are it is the same 4 speed. | | |
#36018 10/14/2004 6:18 PM | | Anonymous Unregistered | | Anonymous Unregistered | Rear output section may be a little different. Weren't the 1/2 tons enclosed driveline while the 3/4 tons were open driveline during these years? In any case the tranny should be the SM 420. | | |
#36019 10/14/2004 7:05 PM | Joined: May 2004 Posts: 105 'Bolter | | 'Bolter Joined: May 2004 Posts: 105 | The 1/2 ton are enclosed driveline. However, the 3/4 ton are also enclosed but only half way back. From there to the differential, it is open.
Thanks for the help | | |
|
|
| |
