| |
Click on image for the lowdown. 
====
| | |
8 members (Joe H, Joe Lowe III, frogfarmer, Shade Baby, 3B, Oswald, Cosmo, 1 invisible),
66
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,073 Posts1,055,908 Members48,429 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2007 Posts: 94 Wrench Fetcher | | Wrench Fetcher Joined: Oct 2007 Posts: 94 | Morning guys!
I know that this isn't an bolt per se, but I have a problem that none of my guys can figure out. I built another S10 a day or so before Thanksgiving. Well, this time I pretty much just put a whole new body and wiring harnesses on a truck that had a really bad passenger side hit.
I have one problem that seems to be unfixable, at least to myself and everyone else I've talked to. The truck originally (before I swapped the body) had an electronic speedo. The cab that I put on has a cable operated speedo. Here's where my problem lies. I can't just swap the dash out to fix it, because the main wiring harness that replaced the old one does not have the wires that run to the tranny for the elec. speedo.
As far as I know, the do not make a converter to go from elec to cable. I tried to install a speedo from one of the street rods last, hoping that it would function enough for me to pass inspection, but that didn't work either. Any ideas?? Anything would be much appreciated. I'm running out of ideas. Thanx. | | | | | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 |
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | | | | Joined: Oct 2007 Posts: 94 Wrench Fetcher | | Wrench Fetcher Joined: Oct 2007 Posts: 94 | Hey thanks for the link!! I'll keep it in mind when I go to fix it. I got lucky and a buddy inspected it, so for now it's not an issue. It's always nice to know how fast you're going, though! | | | | | Joined: Jul 2004 Posts: 427 Shop Shark | | Shop Shark Joined: Jul 2004 Posts: 427 | | | |
|
|
| |
