The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
6 members (rfs56trk, Hanks custodian, mason86, Donf, dt235sd, Wally / Montana), 111 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,049
Posts1,055,658
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#332533 11/03/2007 7:03 PM
Joined: Nov 2001
Posts: 438
4
'Bolter
'Bolter
4 Offline
Joined: Nov 2001
Posts: 438
I am reassembling the doors of my 49 burb. I have new glass and need to attach the glass to the upper frame and also to the regulator. The guy who cut the new glass gave me some setting tape. Is this the best method or are folks using glass adhesive like the do on newer cars? Thanks for any advice.


Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison
Things may come to those who wait...but only the things left by those who hustle."-Abraham Lincoln

49bourbon #333236 11/05/2007 1:42 PM
Joined: Mar 2005
Posts: 388
B
Shop Shark
Shop Shark
B Offline
Joined: Mar 2005
Posts: 388
Hey 49B , I removed the glass from my '48 doors and the tape was still on there in great shape so I'm going back with the same type of glass tape the glass shops use today. Does a great job and very inexpensive comes in a roll. (also don't get all over everything like glass adhesive caulk)
good luck.

bowtiesr4me #333262 11/05/2007 2:49 PM
Joined: Jan 2002
Posts: 2,254
O
'Bolter
'Bolter
O Offline
Joined: Jan 2002
Posts: 2,254
The tape comes in different thicknesses. I replaced the glass in my 55 2nd. I set the tape around the window, applies some oil, and slowly pressed it in with a bar clamp. Go slowly and you will be OK. You will need to trim the tape after you have it installed. Oh. I have a friend that installs automotive glass. He had a roll that they had not used in years (imagine that) so he gave me the roll. Now I have some for the 53 that I am taking apart.

Best of luck.


Dennis
-there is nothing stronger than the heart of a volunteer-
oldbluetruck #333323 11/05/2007 5:24 PM
Joined: Nov 2001
Posts: 438
4
'Bolter
'Bolter
4 Offline
Joined: Nov 2001
Posts: 438
Thanks for the replies


Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison
Things may come to those who wait...but only the things left by those who hustle."-Abraham Lincoln

49bourbon #369368 02/02/2008 12:24 AM
Joined: Nov 1995
Posts: 5,716
J
62401
62401
J Offline
Joined: Nov 1995
Posts: 5,716
I just did my door glass this evening ('49 1.5-ton). I tried some tape my glass place gave me, but it was too thick. So I ordered the tape from American Classic and it worked like a champ! Got both door windows reset in the frame and the piece along the bottom (that attaches to the regulator channel) done in under 30 minutes. One of the easiest things I've done on this project!

Good luck!

John


~ John

A kid raised on Hotwheels, Matchbox and Tonka cannot be reasonably expected to own only one vehicle as an adult.

1949 Chevrolet 3804
In the Legacy Gallery | In the Gallery Forum
1973 IH 1310 Dump
1963 Kaiser M38A1
2001 International/AmTran RE3000 "Skoolie"
2014 Ford E-350 4x4 (Quigley)

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0