| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,017 Posts1,055,338 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#30283 10/11/2003 5:56 AM | Joined: Sep 2003 Posts: 55 Member | | Member Joined: Sep 2003 Posts: 55 | I'm hanging a resored door on my 51.the bottom hing needs to be bent a little to make it fit the body.I had a 54 I restored and remember in the manual I had it explained the bend the hing to fit the cab better. Problem is I have the factory assembly for 47 to 54, the shop manual for 51 and 54 and can't find the info. All they show is up,down foward aft. No in out. I had the 54 in the 70s. I would love to know now what I knew then. If any one can help I will name the spud truck after them. Thank you O. :confused: | | |
#30284 10/11/2003 11:26 AM | Joined: Dec 2001 Posts: 1,745 Member | | Member Joined: Dec 2001 Posts: 1,745 | door alignment is voodoo science...
54 3100 with 235
62 flatbed dump C60 with 261
| | |
#30286 10/13/2003 9:10 AM | Joined: Sep 2003 Posts: 55 Member | | Member Joined: Sep 2003 Posts: 55 | O.K. Its Chuck 2 or II or two or as well or in addition to or icluded as. Thankyou very much,I happened to have an extra 8 and a half hours to put the door on, remove it and repeat. Many times, or should that be many many? I got the door to fit to a T now I can put a new corner on the thing. Still waiting for the lower left rear door piller to show to start the driver side. A thousand thanks to you the Chuck.O  | | |
|
|
| |
