| |
Click on image for the lowdown. 
====
| | |
0 members (),
52
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,050 Posts1,055,643 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#25474 08/15/2002 7:35 PM | Joined: Aug 2002 Posts: 455 Shop Shark | | Shop Shark Joined: Aug 2002 Posts: 455 | I am having my 235 rebuild on my 52 1/2tonner and am curious which tranny options I have for swapping.
Ideally I want to hang on to the original 3-on-the-tree shifter assembly and my closed torque-tube driveshaft.
I have Patrick's 3:55 rearend and read in the catalogue about the saginaw 4speed being ideal for my setup.
Is there a tranny with overdrive, that I can use with my original shifter and driveline?
I have also seen overdrive add-ons.
Is there one that would fit my original 3speed?
I am thinking of having the overdrive lever on the floor right next to the bench, maybe.
Is something like that possible or is that just a dream of an eager to learn beginner at this? | | |
#25475 08/15/2002 8:25 PM | Joined: Dec 2001 Posts: 21 Apprentice | | Apprentice Joined: Dec 2001 Posts: 21 | Siegmund52,
You are pretty much limited to what you can do because of the "torque-tube driveshaft". I haven't of an "overdrive" unit for the 1/2T, 3Spd - 4Spd trucks running the torque-tube. If you go to an open driveshaft your combinations open up quite a bit.
64K10
64K10
| | |
#25476 08/16/2002 2:18 AM | Joined: Aug 2002 Posts: 455 Shop Shark | | Shop Shark Joined: Aug 2002 Posts: 455 | Thanks for the reminder. I am aware of the limitations.
Just curious if anybody can provide a basic list of tranny models from memory about what can be used with or without open driveshaft on a 235 and 3:55 rear.
Any hints? | | |
#25477 08/16/2002 5:00 AM | Joined: Dec 2001 Posts: 21 Apprentice | | Apprentice Joined: Dec 2001 Posts: 21 | Sieg...
Yep, it's limited, either the 3Spd or the 4Spd (SM420 with a very low 1st gear). The final drive is still 1:1.
64K10
| | |
|
|
| |
