The guys with the big bolts posted a few pictures a while back and there were a couple of other pictures of a 1 ton, but I couldn't find any of the 'small' trucks working. So I decided to start a new thread. I've been spending my vacation putting in an above ground pond for my wife. That meant bringing in finely crushed gravel (screenings) as a base for the blocks. I don't know when the shocks were last replaced and the coils are a bit saggy, but there are 2 half elipticle overload springs under there that work great. I switched tires on the back from my 295s to 235s so they wouldn't rub.
Here's Big Red before the gravel dropped...
http://good-times.webshots.com/photo/2343846760033913215vLEGAb?vhost=good-times and after most of the load was in..
http://good-times.webshots.com/photo/2455055060033913215RNRbDh Final result was 1.2 metric tons in the old boy.
It was a little tight getting down the driveway...
http://good-times.webshots.com/photo/2343769520033913215VaAsTE We've also been loading her up with concrete blocks and next Saturday it'll be a pallet of 715 square feet of sod!
The Big Bolts don't get all the fun.
