The Stovebolt Site Forums The Shop Area General Truck Talk Part Numbers for Roller Bearings for Front axle 46 1/2 ton

Here's a list of the roller bearings I installed on my 46 1/2 ton. If you're looking for the numbers and make, here they are:

Outer smaller bearing:

Brand--Timken #LM11919 and #LM11949 (one is the bearing, one is the race)

Larger inner bearing:

Brand--MBS #909052R (all one piece)

Seal:

Brand--Timken #6064

I think these will fit many other years as well, hope this helps you.

Possum

Thanks for the info. I'm sure there are some here who can use it. Anything else people should know? Any problems with the install? Are they a direct swap in? Did you buy them locally at a bearing house or order them from a vendor?
Thanks, Jeff

Thanks this will be usefull

Hi Jeff,
The parts are a direct install, using stock spindles and brake drums. Very easy to install, lube 'em up, slap 'em in. A local brake guy told me to tighten the bearings fairly snug, then back off about 1/4 turn. Seemed to work good, they spin easily and there is no wobble when I try to make it do so.
I bought them from a vendor online thru ebay. I originally had purchased another set thru Bowtie Bits, but they were cheap Chinese bearings with no identification numbers stamped on them. I returned them, I wanted USA, Japanese, or German bearings. The Timken's are USA, the MBS are made in Japan. Much better quality than those ones Bowtie wanted to sell me.
Have a nice day,
Possum