| |
Click on image for the lowdown. 
====
| | |
0 members (),
108
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,115 Posts1,056,292 Members48,439 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2003 Posts: 66 Shop Shark | | Shop Shark Joined: Feb 2003 Posts: 66 | On a 58 gmc 336 engine, 2 barrel carb. After I get it warmed up and park it in the garage, it smells the whole place up. The in the carb seals well. It also doesnt have the exhaust heat riser valves in the exhaust (still stock manifolds)
Do i need to rebuild the carb again (it was rebuilt 3000k ago and 2 years)??
Do i need to make some heat riser valves (i cant find them anywhere)??
Any other sugestions on what it might be?
I think it has done this from day 1 that i owned it (i didnt have an attached garage before)
Thanks,
Brian
Sometimes, David beats Goliath. Nobody talks, however, about how many little guys Goliath already beat into the ground. . .
| | | | | Joined: Apr 2005 Posts: 641 Shop Shark | | Shop Shark Joined: Apr 2005 Posts: 641 | make sure when its rebuilt this time to use viton tips on the needle valves pull the air cleaner after you shut it of and look in the carb with a flashlight bet you will see gas dripping in for a few minutes | | | | | Joined: Jul 2006 Posts: 240 'Bolter | | 'Bolter Joined: Jul 2006 Posts: 240 | Look at the fuel system from front to back for any wet spots, only takes a few drops to smell the garage up. Check the float level if to high it will let the carb dribble fuel.
You Learn more Listening than Talking
| | |
|
|
| |
