| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,034 Posts1,055,541 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#23463 04/08/2005 1:37 AM | Joined: Jun 2004 Posts: 37 Wrench Fetcher | | Wrench Fetcher Joined: Jun 2004 Posts: 37 | I'm ready to finish the re-installation of my engine and am down to re-filling the front universal bell housing. Is there a fill hole or can you do it through the speedometer drive gear and if so how?
Thanks
My rule of life: You can have anything you want; you just can't have everything you want.
| | |
#23464 04/08/2005 3:36 AM | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | evergreenw,
Is there a square head pipe plug near the rear of the transmission on the passenger side? Remove the plug and fill with transmission lubricant (SAE 90).
Tim | | |
#23465 04/08/2005 4:09 AM | Joined: Oct 2003 Posts: 124 Member | | Member Joined: Oct 2003 Posts: 124 | On an automatic transmission, the book says to pre-lube thru the speedo gear hole. About 3/4 cup if I recall.
I found that using a siphon (spelling?) bulb and tubing to slowly pump the fluid in worked well. | | |
|
|
| |
