The Stovebolt.com Forums

Home | Tech Tips | Gallery | FAQ | Events | Features | Search

Register Log In

The Stovebolt Site Forums The Shop Area General Truck Talk Heater hose connections? ('64 C10)

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

click here to search

New here ??? Where to start?

Click on image for the lowdown.

Where do I go around here?

====

Who's Online Now

2 members (55shaker, moparguy), 72 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,128

Posts1,056,684

Members48,452

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Print Thread

Heater hose connections? ('64 C10) #182110 02/18/2005 11:02 AM
Joined: Jan 2005 Posts: 48 London, England L Limey Simon Junior Member
Limey Simon Junior Member L Joined: Jan 2005 Posts: 48 London, England	Hopefully an easy answer... I need to reconnect the heater on my '64 C10, which looks like it hasn't been used for years (ex-California!) I assume you run a larger(5/8" ?) hose from water pump to the larger diameter heater pipe (which enters the heater box to the rear) and fit a smaller (1/2" ?) hose from the small heater pipe back to the thermostat housing? Is this the correct in/out plumbing? Thanks guys, Limey

Re: Heater hose connections? ('64 C10) #182111 02/18/2005 1:02 PM
Joined: Jan 2001 Posts: 55 Kentucky K Kentrucky Member
Kentrucky Member K Joined: Jan 2001 Posts: 55 Kentucky	On my 64 I have 3/4" hose from water pump and 5/8" from intake manifold. No problems I know of and the heat will run you out of the cab. Hope this helps. Sittin' Pretty in My Old Kentucky Home. http://www.picturetrail.com/barneysbowtie

Re: Heater hose connections? ('64 C10) #182112 02/18/2005 3:19 PM
Joined: Jan 2005 Posts: 48 London, England L Limey Simon Junior Member
Limey Simon Junior Member L Joined: Jan 2005 Posts: 48 London, England	Thanks Kentrucky - I could use some heat in the cab as snow is forecast! Is the heater element easy to remove to test it? - don't want a cab full of water if it turns out it leaks!

Re: Heater hose connections? ('64 C10) #182113 02/18/2005 11:27 PM
Joined: Jan 2001 Posts: 55 Kentucky K Kentrucky Member
Kentrucky Member K Joined: Jan 2001 Posts: 55 Kentucky	Well, this is my first project, so I'm learning as I go, and everything is "the first time" for me...but I just started taking it apart til I had everything on the bench...cleaned out the mouse nests...repainted...and reassembled...then put it back where I found it. Seemed easy enough...but maybe I got lucky! Sittin' Pretty in My Old Kentucky Home. http://www.picturetrail.com/barneysbowtie

Re: Heater hose connections? ('64 C10) #182114 02/21/2005 3:28 PM
Joined: Jan 2005 Posts: 48 London, England L Limey Simon Junior Member
Limey Simon Junior Member L Joined: Jan 2005 Posts: 48 London, England	Stripped my heater out on Saturday and the heater core is burst (lucky I didn't connect it). At least I had a chance to remove 40 years of muck, and the fan still runs! Limey

Moderated by Gdads51

Hop To

Link Copied to Clipboard

Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop

Powered by UBB.threads™ PHP Forum Software 8.0.0