Click on image for the lowdown. 
====
| | |
0 members (),
348
guests, and
6
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,162 Posts1,057,042 Members48,463 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2004 Posts: 1,552 Shop Shark | | Shop Shark Joined: Nov 2004 Posts: 1,552 | I have completed the interior work on my '66 C-10, however I do not have the original jack, jack handle and lug wrench provided by GM. I have the jack mount, springs and keepers that are installed under the driver's seat. I would like to locate a source for new equipment. If not, looks like I may be visiting the local salvage.
Thanks for your assistance.
LILRED66 | | | | | Joined: Feb 2002 Posts: 2,893 Socket Breaker | | Socket Breaker Joined: Feb 2002 Posts: 2,893 | good luck.
I never had any joy finding any of that stuff at my local yards.
-W | | | | | Joined: May 2001 Posts: 709 Shop Shark | | Shop Shark Joined: May 2001 Posts: 709 | Saw one of these set-ups on Ebay last week but don't know if it is still there. Jack, crank handle, and lug wrench. Might wanna do a search.
Bruce
Old Toy: Ol' Betsy stock 59 Apache SB Stepside (Gone but not Forgotten)
New Toy: 1962 Impala SS Coupe
The Driver: 1990 Toyota truck
| | | | | Joined: May 2004 Posts: 124 Member | | Member Joined: May 2004 Posts: 124 | If you just want it for originality thats fine but I had a 69 chevy half ton and the jack would'nt fit under the back axle if the tire was flat. I bought a one ton jack that has worked fine on every thing I have used it on for many years.
I like old trucks
| | | | | Joined: Sep 2004 Posts: 122 'Bolter | | 'Bolter Joined: Sep 2004 Posts: 122 | Tony, Golden State Parts in Carson City, NV. sells the correct 1947-72 Chevy truck jack handle (part #17-156) for $37.95 and tire iron [lug wrench] (part #17-T15) for $14.95. Here is their website: http://www.golden-state-parts.com/ You might check eBay for the actual correct jack. Good luck with your project! | | | | | Joined: Nov 2004 Posts: 1,552 Shop Shark | | Shop Shark Joined: Nov 2004 Posts: 1,552 | Jim:
Thanks for the info. I am able to find the jack handle and the lug wrench. My difficulty is finding the original jack. I'll keep hunting.
Keep on trucking. | | | | | Joined: Jun 2000 Posts: 2,773 'Bolter | | 'Bolter Joined: Jun 2000 Posts: 2,773 | Originally posted by Bullet:
If you just want it for originality thats fine but I had a 69 chevy half ton and the jack would'nt fit under the back axle if the tire was flat. I bought a one ton jack that has worked fine on every thing I have used it on for many years. It wouldn't fit under the lower A on the front, either. Meant that if you really had a flat you better have a couple of 2x4 blocks handy. Jack where you can, block it up and jack some more.
Fred
52 3600
69 C-10
| | | | | Joined: Nov 2004 Posts: 1,552 Shop Shark | | Shop Shark Joined: Nov 2004 Posts: 1,552 | Fellow Bolters:
I broke down and purchased a new jack handle and lug wrench from Golden State. Keep your eyes and ears peeled for a jack. That will make my interior project complete. Thanks again for the input. | | |
|
|
