| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,017 Posts1,055,338 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#16743 03/25/2003 1:33 PM | Joined: Oct 2002 Posts: 29 Junior Member | | Junior Member Joined: Oct 2002 Posts: 29 | I'm smack dab in the middle of installing a 5 speed s-10 transmission and I have a question. The only disc that will work is 11 inches/14 spline. My original pressure plate has a 10 inch clutch disc. Since I'm planning to use a stock '63 pressure plate, can I just get a pressure plate for an 11 inch disc (I know these trucks came with 10,11,or 12 inch clutches) and will it bolt to my stock flywheel?? Any help is appreciated.
P.S.--Does anyone know why my engine and bellhousing, out of a Pontiac, have a Chevy bolt pattern?? I was surprised.
LET'S GO ISLANDERS!!!
1963 Chevy 1/2 ton fleetside w/'65 Pontiac 215 6cyl.(not the OHC engine!)
1950 Ford 2 door sedan-project
| | |
#16744 03/25/2003 8:42 PM | Joined: Oct 2001 Posts: 3,458 Extreme Gabster | | Extreme Gabster Joined: Oct 2001 Posts: 3,458 | I don't know about the flywheel, but if you go to a friction shop they should be able to build you a 10" clutch disc with the right center hub pretty easily.
Paint & Body Shop moderator
A lone amateur built the Ark. A large group of professionals built the Titanic. | | |
#16745 04/12/2003 5:05 PM | Joined: Apr 2003 Posts: 5 Member | | Member Joined: Apr 2003 Posts: 5 | I believe a 11' pressure plate will bolt right up. make sure to machine flywheel
Dan G | | |
|
|
| |
