| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,094 Posts1,056,487 Members48,444 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2007 Posts: 172 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2007 Posts: 172 | Are those things supposed to come out? Sheesh...I got nuthin'. Didn't want to strip them so figgered I'd ask first.
Should these screws just come out?
(I am figuring that they must have come off at one time since there are different mirrors bolted onto the door.)
Dave
1965 Chevy C-30 1-Ton "Work like you don't need the money. Love like you've never been hurt. Dance like nobody's watching." | | | | | Joined: Nov 2004 Posts: 1,552 Shop Shark | | Shop Shark Joined: Nov 2004 Posts: 1,552 | Are you talking about the screws holding the door panel in place around the perimeter? If so, they have a capture nut in the door shell. Sometimes they strip out or the capture nut breaks free from the door shell and spins freely. In this case, you can drill them out and tap the hole. They are designed to come out, however they get pretty tight if they have not been taken out in some time and hit with some WD40. Good luck with your project.
Tony | | |
|
|
| |
