Winter is Coming
Time to think about winterizing your Bolt.
A good Tech Tip WINTERIZING YOUR TRUCK including a link back to the Forums for additional tips.
1939 Packard Standard Eight Coupe (The Phantom) | 1956 Cadillac Coupe de Ville (The Bismarck) | 1964 Ford Galaxie 500 coupe |1966 Ford Mustang (Little Red) | 1969 Pontiac GTO (The Dishpit) I 1979 Ford F-100 | 1976 Ford F-150 (Big Red) | 1995 Ford F-150 (Newt)
An original 1952 Chevrolet Trucks dealer sales brochure doesn't specify in writing wheel colors, but you can see in the artwork found in the brochure a wide variety of color choices.
I don't have a 1952 Chevrolet Truck Salesman's Data Book, but do have one for my '51. In it, the only reference to paint on wheels just gives colors for the "stripes". Otherwise the only other mention on truck colors is the overall truck color.
I'm guessing that the wheels would likely have been body color, with the specified complimentary stripe color.
I did notice that the 3600 and 3800 series trucks for the most part in the dealer brochure look to have "black" painted wheels. Possibly related to them being more of the "work-horse" models that got less attention to eye appeal.
~ Dan 1951 Chevy 3 window 3100 Follow this story in the DITY Gallery "My Grandpa Carl's Truck and How it Became Mine" 1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver) US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)
I have a 1952 Truck brochure and the cover page shows a 3100 with black wheels. Other pages show both 3100's and panels with body color wheels and even some with other than body color wheels, for instance a blue panel with red wheels. Like Dan mentioned the bigger trucks are generally shown with black wheels. I believe I got that brochure from the GM Heritage site, but I don't see it there now. If you'd like a copy, let me know. [on edit] It's the same brochure that Dan has in his post.
So it seems like wheels on a 3100 could be either black or body color. I went with black wheels on my 3100 as it was originally a fleet (base model) truck.
Last edited by klhansen; 11/14/20263:59 AM.
Kevin 1951 Chevy 3100 work truck Follow this saga in Project Journal Photos 1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car) Busting rust since the mid-60's If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
I believe that Joe's link is just for CARS, as I don't see any of the Truck body colors in that list. Cars definitely had body color wheels.
Kevin 1951 Chevy 3100 work truck Follow this saga in Project Journal Photos 1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car) Busting rust since the mid-60's If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Maybe, I don't know what color goes where, it's still a good chart to use if one was to paint their wheels. You sure don't see this many colors on todays cars. Now it would be four colors and two of them would be grey!
Here's an unrestored 1949 that has black wheels. Obviously not a Deluxe Cab (5 window) which may be more likely to have body color wheels with pinstripes. They did have a damaged rear fender fixed and repainted, otherwise untouched.
Kevin 1951 Chevy 3100 work truck Follow this saga in Project Journal Photos 1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car) Busting rust since the mid-60's If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
When I first got my 52 3100 the wheels were painted black and the paint had not held up well. So I started sanding them down to repaint when the body was repainted. The original color of the truck was sun beige. Only very slightly less boring than that cream color GM used and looked to me more like a worn out and faded old lampshade than a paint color. And the more I sanded I found all 4 wheels were originally...beige. Only a thin layer of primer below that. They had stripes around them, however my guess is somebody before me sanded those when the wheels were painted black so I really couldn't tell what color they had been. I ended up guessing they might have been navy but the remnants also looked black. A friend said a deep cranberry stripe would have been a good choice with the sleepy beige paint and I agreed, but it wasn't anything as tasteful as that. The other thing I did was to sand/paint the inside of each wheel with some old and thick oil based enamel paint I had here. It took several days to dry but made a nice difference with the tubeless tires.
~ Jon 1952 1/2 ton with 1959 235 | T5 with 3.07 rear end
I had a wheel in my collection that was painted Forest Green with Cream stripe as noted in the Vehicle Information Kits. It wasn't a car wheel as they were 5 lug and the cars came in different colors than the trucks with different color wheel stripes (silver or black, depending on model.)
Here's some pics of that wheel. Someone had asked about stripe location and width a while back and I posted these for them.
So I can say with some certainty that body color wheels WERE an option on trucks.
Kevin 1951 Chevy 3100 work truck Follow this saga in Project Journal Photos 1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car) Busting rust since the mid-60's If you're smart enough to take it apart, you darn well better be smart enough to put it back together.