The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Brrrr

Winter is Coming
Time to think about winterizing your Bolt.
Stored trucks should have a high-quality security system. A good Tech Tip
WINTERIZING YOUR TRUCK
including a link back to the Forums for additional tips.
Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
4 members (Guitplayer, greenie-reddy, dt235sd, frogfarmer), 101 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,279
Posts1,058,593
Members48,492
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#1614328 10/30/2026 4:04 PM
Joined: Mar 2007
Posts: 3,503
T
Crusty Old Sarge
Crusty Old Sarge
T Offline
Joined: Mar 2007
Posts: 3,503
I have 2 Carter YF carburetors on hand and wondering if one series is preferred over the other. I am wanting to rebuild both, swap one for my current Rochester B with possiblly selling the second. The numbers are pictured below.
Attachments
20241218_155831.jpg (56.52 KB, 45 downloads)
Carter YF 1
20241218_155838.jpg (66.16 KB, 45 downloads)
Carter YF 2

Last edited by TUTS 59; 10/30/2026 4:07 PM. Reason: Add Images

~ Craig
1958 Viking 4400
"The Book of Thor"
Read the story in the DITY
1960 Chevrolet C10
"A Family Heirloom"
Follow the story in the DITY Gallery
'59 Apache 31, 327 V8 (0.030 over), Muncie M20 4 Speed, GM 10 Bolt Rear... long term project (30 years and counting)

If you don't like driving yourTruck, you won't drive yourTruck..| Living life in the SLOW lane
Joined: May 2015
Posts: 11,282
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Joined: May 2015
Posts: 11,282
Not sure it helps, but the 964S is for a 216. That's what I have on my truck and it does a good job. With the lower series number, the 787SB is likely also for a 216. Neither probably not the best one if it's going on a 235. The mounting hole spacing on the 964S is smaller than on a 235 manifold and won't physically fit. Jon (carbking) should know and may weigh in with more info.


Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Joined: Mar 2007
Posts: 3,503
T
Crusty Old Sarge
Crusty Old Sarge
T Offline
Joined: Mar 2007
Posts: 3,503
These carburetors were on a dual Offenhauser manifold I acquired a while back. I have no idea what they were originally on just that they weren't a matched pair.


~ Craig
1958 Viking 4400
"The Book of Thor"
Read the story in the DITY
1960 Chevrolet C10
"A Family Heirloom"
Follow the story in the DITY Gallery
'59 Apache 31, 327 V8 (0.030 over), Muncie M20 4 Speed, GM 10 Bolt Rear... long term project (30 years and counting)

If you don't like driving yourTruck, you won't drive yourTruck..| Living life in the SLOW lane
Joined: Nov 2002
Posts: 2,786
C
Carburetion specialist
Carburetion specialist
C Online: Content
Joined: Nov 2002
Posts: 2,786
The 787s was the first production of the YF 216 replacement; the 964s was a later upgrade for the 216.

Both will work; the 964 MIGHT work slightly better.

Either is superior (opinion of the writer) to the Rochester.

Jon


Good carburetion is fuelish hot air
The most expensive carburetor is the wrong one you attempt to modify.
If you truly believe "one size fits all," try walking a mile in your spouse's shoes!
The Carburetor Shop

Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0