Last fall I tried to Sneaky Pete & Chinese finger trap in a rear main seal W/1941 235CI engine in truck. No Go! A well meaning friend of a friend shows up declaring "I've done hundreds of those". 6 hours later he says I'll be back in 3 days with a guitar string, haven't seen or heard from him in 9 months.
I've since pulled the engine to do this right and glad I did because I've found a bunch of really ugly stuff.
Here's the rub "friend" has my rear main cap bolts.. I Pulled mid & front cap bolt...not the same size. My supply of big bolts is limited so I can't find the size I need to buy. Cannot find the specs on these anywhere nor any parts place that claims to have them.
If anyone knows what size bolt I need or where I can get them I would be grateful for the info, or If you have 4 of these I would be more than happy to buy them from you.
At this point all I know is they need to be about 2 or 2/14 inches long..
Thanks for the help
Darwin Shilling
PS He has my bolts, but I have his digital torque wrench
