| |
Click on image for the lowdown. 
====
| | |
8 members (klhansen, Shade Baby, Shaffer's1950, JW51, Cosmo, Oswald, 2 invisible),
57
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,075 Posts1,055,919 Members48,429 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2005 Posts: 355 Member | | Member Joined: Nov 2005 Posts: 355 | Some of you may blast outdoors, and ran acrosst the problem of needing a hood, to protect your face. If you have a welding helmet already, its easy to remove the colored lense(keep in the clear ones) and just tape a bath towel around the back edges. Its cheap and works better than some of the fancy store bought ones. I have one of the fancy ones too, but it always fogs up inside, and you can't see. | | | | | Joined: Oct 2005 Posts: 69 Wrench Fetcher | | Wrench Fetcher Joined: Oct 2005 Posts: 69 | Jeff
I do the same thing, only I cut a piece of glass to replace the lens and I ripped up a old sheet. I made a air supply with a bathroom fan a ABS adpt. and a central vac hose. The helmet doesn't fog up and it help keep mask clean. Small world. Jeff
New deal for old steel
| | | | | Joined: Nov 2005 Posts: 355 Member | | Member Joined: Nov 2005 Posts: 355 | Your not blowing outside dust laden air into your helmet are you? | | | | | Joined: Oct 2005 Posts: 69 Wrench Fetcher | | Wrench Fetcher Joined: Oct 2005 Posts: 69 | No the hose is about 40ft and I put a flat air filter from my wife's car on top.
New deal for old steel
| | |
|
|
| |
