The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Brrrr

Winter is Coming
Time to think about winterizing your Bolt.
A good Tech Tip
WINTERIZING YOUR TRUCK
including a link back to the Forums for additional tips.
Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
3 members (Forty9, Guitplayer, Bill Hanlon), 168 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,279
Posts1,058,582
Members48,492
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
Joined: Sep 2022
Posts: 15
V
'Bolter
'Bolter
V Offline
Joined: Sep 2022
Posts: 15
Hi
I have a 230 and a powerglide and I have a 46 3/4 T and a 1/2t spare frame.
Being budget minded (poor) I'm thinking of using the 1/2T frame with the 230 I have and the Powerglide I have and mating to the torque tube diff/rear.
I understand you can swap all sorts of things and wonder if this is possible - use the parts I own.
The goal of this build is to putt putt to the Home Depot about 8 miles away occasionally and the cars and coffee sort of meets.
It's a semi retirement project so not a huge hurry but would like some general direction.
Thanks


1946 Chevy 3/4-ton
"Let's the games begin"
Story in the DITY Gallery
What if the Hokey Pokey really is what its all about?
Joined: Sep 2009
Posts: 6,228
Gearhead, Stovebolt Tech and Parts Tracker, Mod for Swap Meet and GTT
Gearhead, Stovebolt Tech and Parts Tracker, Mod for Swap Meet and GTT
Joined: Sep 2009
Posts: 6,228
vonkluver, Are you talking about using an early cast iron Powerglide with the torque tube output??? I don't think the mounting pattern on one of those will match up to the 230 as that has the same bell housing pattern as the V8. The 230 Powerglide would be an open drive output requiring a different open drive rear axle. Not sure how you would mate the existing torque tube to the non-torque tube Powerglide???

If you are going to use the 230 and Powerglide, just go full open drive rear end and your cost will be much smaller than trying to do the adpation. smile


~ Dan
1951 Chevy 3 window 3100
Follow this story in the DITY Gallery
"My Grandpa Carl's Truck and How it Became Mine"
1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver)
US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)
Joined: Jul 2014
Posts: 892
1
'Bolter
'Bolter
1 Offline
Joined: Jul 2014
Posts: 892
The last torque-tube powerglide would have been 54. It was cast iron. I wonder if by some stroke of luck GM didn't change the tail-shaft bolt pattern when they went to aluminum. I also know the dry lakes boys like cast iron PGs because they are strong and don't use much power. There are lots of aftermarket power glide parts or there were last I looked, which is maybe 10 years so its possible that one could adapt an aftermarket cast Iron one to a torque tube but probably not inexpensive. all depends on parts interchange, which I'm no expert. Maybe put a post in the Hi Po forum.


1951 3800 1-ton
"Earning its keep from the get-go"
In the DITY Gallery
1962 261 (w/cam, Fenton headers, 2 carbs, MSD ign.), SM420 & Brown-Lipe 6231A 3spd aux. trans, stock axles & brakes. Owned since 1971.
Joined: Sep 2022
Posts: 15
V
'Bolter
'Bolter
V Offline
Joined: Sep 2022
Posts: 15
Sorry its a PG from a 1967 Camaro aluminum version that I have in stock. I'll make some measurements and look at Hi Po forum


1946 Chevy 3/4-ton
"Let's the games begin"
Story in the DITY Gallery
What if the Hokey Pokey really is what its all about?

Moderated by  Dusty53, SWEET 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0