Phil Moderator, The Engine Shop, Interiors and Project Journals
1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes Project Journals Stovebolt Gallery Forum
Yes I order from there,they are back ordered. Napa has no part number. Is there another year that will work? I don’t have any old part to try and match up. Any other suggestions. Thanks
Check out this offering (not mine) for the Bendix brake spring kit you are looking for. Complete kit for front and rear, so if not all is needed, spare parts for later. It's pricier than the one Phil posted, but says they have 10 kits in stock.
Hope this may be of help.
Last edited by Peggy M; 11/07/20232:41 PM.
~ Dan 1951 Chevy 3 window 3100 Follow this story in the DITY Gallery "My Grandpa Carl's Truck and How it Became Mine" 1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver) US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)
Please search using this wording: drum brake hardware kit Auto Zone has them for like $10 for 2 wheels. I bought a set there about 2 months ago and it was just fine.
~ Jon 1952 1/2 ton with 1959 235 | T5 with 3.07 rear end
Best I can recollect, all 1/2 ton chevy used 11x2 Bendix brakes front and rear with the same hardware from 1951-1962. From 1963-1970, 11x2, same hardware with self adjusters. This hardware can be used to convert earlier years to self adjusters. 1971-72, 11x2 used only on rear. Same 11x2 Bendix hardware was also used on similar year GM sedans and Corvair trucks. Also was used on F##d products.
It's pricier than the one Phil posted, but says they have 10 kits in stock.