Click on image for the lowdown.
====
2 members (cmayna Wickedbass Key: Admin ,
Global Mod ,
Mod
Forums66
Topics128,086
Posts1,056,101
Members48,434
Most Online14,466Apr 26th, 2026
AD Chevy Trucks Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
THANKS!
For helping keep this great
old truck web site
on the Internet for
over 30 years! and not clogged down Again, thanks!
Joined: Feb 2021
Posts: 98
'Bolter
'Bolter
Joined: Feb 2021
Posts: 98
Would love to here form anyone that has replaced the front lower section,upper wheel arch and rear lower section. Any tips that may help or any problems you ran into.
Attachments
Joined: May 2005
Posts: 8,983
Sir Searchalot
Sir Searchalot
Joined: May 2005
Posts: 8,983
Been there done that. Email because this will take some time and many posts.....and more pics.
Last edited by bartamos; 12/02/2022 2:07 AM .
Joined: Apr 2007
Posts: 456
'Bolter
'Bolter
Joined: Apr 2007
Posts: 456
The sheetmetal is a perfect match for a ‘59-‘66 fleetside bed. You can buy the bedsides new.
Joined: Feb 2021
Posts: 98
'Bolter
'Bolter
Joined: Feb 2021
Posts: 98
Have ordered patch panels for 60 to 66 fleetside. Hope they'll work out.
Joined: Nov 2022
Posts: 18
'Bolter
'Bolter
Joined: Nov 2022
Posts: 18
Any updates on the sheet metal? Quality? Supplier? Fitment?
Joined: Feb 2021
Posts: 98
'Bolter
'Bolter
Joined: Feb 2021
Posts: 98
Sent you a PM. Don't know how much metal you have to replace.
Joined: May 2005
Posts: 8,983
Sir Searchalot
Sir Searchalot
Joined: May 2005
Posts: 8,983
The sheetmetal is a perfect match for a ‘59-‘66 fleetside bed. You can buy the bedsides new.
Have you actually repaired the lower sheet metal on a 55.2-59 suburban or panel? If so what did you actually use?
Joined: Apr 2007
Posts: 456
'Bolter
'Bolter
Joined: Apr 2007
Posts: 456
Yes I have. I used a NOS patch panel for a 60-66 Fleetside to repair my 55 Suburban. It wasn’t completely rotted out, but my truck needed several pieces of the patch panel. I can’t speak to the differences between a NOS and a new panel, but mine was a perfect fit.
Last edited by Napco Man; 12/17/2022 12:57 PM . Reason: Spellcheck
Joined: Feb 2021
Posts: 98
'Bolter
'Bolter
Joined: Feb 2021
Posts: 98
Here are a few pics of the left side patch panels for the 60 to 66 fleetside. You can see that their not going to be an exact fit. The inner panel is alot different then the original inner panel. I plan on cutting and using the rear patch. Like Napco Man said it going to depend on how much has to be replaced and where. I'm going to have to Fab some of my repair areas. Will post some pics.
Attachments
Last edited by Gdads51; 12/15/2023 5:53 PM .
Joined: Apr 2007
Posts: 456
'Bolter
'Bolter
Joined: Apr 2007
Posts: 456
That’s a completely different panel than the one I used. Mine was almost the entire side and included the wheel well. Good luck on your project.
Joined: Sep 2020
Posts: 21
'Bolter
'Bolter
Joined: Sep 2020
Posts: 21
Napco Man: I also have a 57 Burb. Used to live in Virginia. Did you find your patch panel from a junkyard? Anthony "Old Tin" Thomas. [Ecclesia]
Joined: Dec 2020
Posts: 1,961
'Bolter
'Bolter
Joined: Dec 2020
Posts: 1,961
He might thinking of
THIS ONE. Key there is almost. Long forward and short to the rear. Wheel wells match outside.
Last edited by Peggy M; 12/13/2023 7:24 PM .
"You won't find me in an old folks home" Pioneer Florida Cracker
