Click on image for the lowdown. 
====
| | |
7 members (JW51, TUTS 59, 3800GUY, Otto Skorzeny, cmayna, 52GMC35424JD, 1 invisible),
105
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,065 Posts1,055,863 Members48,428 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#14545 09/26/2002 1:38 PM | Joined: Jan 2001 Posts: 428 Shop Shark | | Shop Shark Joined: Jan 2001 Posts: 428 | OK, what clearance should I be shooting for on the rod bearings in a rebuilt 216. Rods have been converted to inserts with stock dipper oil system. No shims I get about .0015. Some of the old Hot Rod books say to open this up to about .003. This ain't goin in a barn burner, just a stock resto. | | |
#14546 09/26/2002 7:01 PM | Joined: Oct 2001 Posts: 3,458 Extreme Gabster | | Extreme Gabster Joined: Oct 2001 Posts: 3,458 | I'm guessing you should either use the stock clearance or follow what the conversion rod manufacturer says to use.
Paint & Body Shop moderator
A lone amateur built the Ark. A large group of professionals built the Titanic. | | |
#14547 09/26/2002 8:33 PM | Joined: Jan 2001 Posts: 230 Shop Shark | | Shop Shark Joined: Jan 2001 Posts: 230 | Generally , .0015" ~ .003" will work fine .
-
-Nate
There is no problem so difficult it cannot be overcome by generous application of brute force & ignorance
| | |
#14548 09/26/2002 11:08 PM | Joined: Feb 2001 Posts: 1,096 'Bolter | | 'Bolter Joined: Feb 2001 Posts: 1,096 | I installed mine with .0015" last November , done nearly 10,000 miles since then , and they are SWEET .  . | | |
#14549 09/27/2002 3:29 PM | Joined: Jan 2001 Posts: 428 Shop Shark | | Shop Shark Joined: Jan 2001 Posts: 428 | Thanks fellas, looks like the machine shop done good. Dusty,you still runnin the splash and dash oil system? | | |
#14550 09/28/2002 7:39 AM | Joined: Feb 2001 Posts: 1,096 'Bolter | | 'Bolter Joined: Feb 2001 Posts: 1,096 | Yep ,, just a wee mod with the inserts in the rods ,, Tools down the road at 55mph real sweet ,, ( '55 diff ,, 3.9:1)  | | |
|
|
