| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,023 Posts1,055,370 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#14458 07/29/2004 9:11 PM | Joined: Sep 2003 Posts: 72 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2003 Posts: 72 | Hi Guys,
Well I got the rebuilt 262 back from my mechanic. Next thing to do is to bolt on the tranny from my 77 GMC truck and fit it in the engine compartment to figure out where to put the motor mount kit I got from The Old Car Center. I understand that I need to have the rad support and the cab on the truck to determine where the engine will fit best. Are there any exact measurements that I need to be aware of? eg. How many inches from the rad should the fan be? Does the cross member under the cab have to be taken out? Also I read somewhere that where the carb sits on the intake manifold should be level or very close to it. Is that correct? Thanks in advance.
kskt4 | | |
|
|
| |
