The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
1 members (Rusty Rod), 80 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,127
Posts1,056,680
Members48,452
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
Joined: May 2006
Posts: 63
R
'Bolter
'Bolter
R Offline
Joined: May 2006
Posts: 63
Hello my fellow stovebolters.
Looking to be guided in the right direction here.
I’ve been looking for information on the A.D. (47-54) right hand drive option.
Is there a current thread on this?

I know that they were not offered in the states.

Any & all help greatly appreciated 🙏🏽
Thanks

Joined: Mar 2007
Posts: 4,215
Leo Online: Content
Moderator
Moderator
Joined: Mar 2007
Posts: 4,215
I think most if not all of the right hand drive vehicles were assembled in Canada.

Joined: May 2006
Posts: 63
R
'Bolter
'Bolter
R Offline
Joined: May 2006
Posts: 63
Yes, that’s what I’ve gathered.
I’d like to see some pictures or video of how the interior and engine compartment was set up.
Obviously gauges & glove box would be flipped but was there any other additions to the dash?

Also the foot pedal lay out. How it looks on the opposite side of the engine bay.

Joined: May 2015
Posts: 11,113
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Joined: May 2015
Posts: 11,113
Per some of the figures in the Factory Assembly manual, the brake pedal is on the right, just inboard of the frame, and clutch just inboard of that. (Sec 5, sheet 2.01)
The accelerator pedal has linkage that crosses to the right side of the cab (Sec 6 sheet 3.04). It's not clear from that figure where it lands in relationship to the brake pedal, but I'd assume it's on the right. Anything else would befuddle a driver used to LHD.
The speedometer is on the left of the steering column (Sec 4, Sheet 7.04)
And on all RHD models, the parking brake is a lever mounted to the transmisison (right of centerline).
The shifter (3 on the tree) is pointed to the left of the steering column (so operated by the left hand) and connected to the transmission by a gawdawful collection of shafts and pivot arms attached to the toe panel to get to the left side of the transmission (sec 7, sheet 2.01).

I just searched eBay for right hand drive vehicles, there was one 53 3100 listed, but from the pictures it was obviously left hand drive. There was also a 68 Camaro listed as RHD, but again, it was obviously LHD. Apparently listers don't know what RHD means. nono

Last edited by klhansen; 02/01/2022 1:48 AM.

Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Joined: Apr 2005
Posts: 2,832
C
'Bolter
'Bolter
C Offline
Joined: Apr 2005
Posts: 2,832
Some people refuse to learn that the sides are determined from the sitting in the seat position rather than viewing from the front.


Evan
Joined: May 2006
Posts: 63
R
'Bolter
'Bolter
R Offline
Joined: May 2006
Posts: 63
Few days searching the net & still nothing.
I would think that if there was any type of information on the right hand drive, it would be here on the stovebolt?


Ya, that’s funny how people still are confused on how to differentiate left from right
@coulover

@klhansen
I’ve looked over the assembly manual now & yes very limited info.


Moderated by  Gdads51 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0