| |
Click on image for the lowdown. 
====
| | |
7 members (Steelonsteel, dt235sd, klhansen, Charles in CA, BarryP, Wally / Montana, 37 GC),
139
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,142 Posts1,056,782 Members48,454 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2004 Posts: 36 Member | | Member Joined: Apr 2004 Posts: 36 | Hi
I'm new to this forum, but not new to old trucks. I am looking at doing a project that I have not done before and have not seen done, although I am sure someone has done it.
What I want to do is transform my 56 Suburban into an expedition rig that is capable of driving back roads without shaking itself apart.Something to haul Kayaks, KTM's and fishing poles. I want to put independant suspension under it that is capable of long travel, say 10", so the ride will be plush, and a little back road work won't hurt the truck.
The rear is no problem, but I need to get the front worked out first as that will dictate the height of the rear. I have looked at the Dakota conversion but that drops the front automaticly 2", which is going in the wrong direction. I want to raise the truck at least 4" above stock so I can get a little taller tire under it so as to smooth out the ride off pavement.
If any of you guys know of such a project, or can remember of one in a magazine I sure would appreciate it if you could let me know.
Thanks......................................Larry | | | | | Joined: Aug 2001 Posts: 78 Wrench Fetcher | | Wrench Fetcher Joined: Aug 2001 Posts: 78 | The only thing I can think of is maybe put it on a late model frame and use fabtech's 2 wheel drive lift kits. Someone on this board is putting an old sub on a (i think) 2000 chevy or gmc truck frame, so it can be done.
-----------------------------------
Rollin' Hard
1946 Chevy 1/2 ton
1959 Phord 1/2 ton
2001 Chevy 1/2 ton
| | | | | Joined: Apr 2004 Posts: 36 Member | | Member Joined: Apr 2004 Posts: 36 | Jeff
Thanks for the reply, but I am committed to working with the original frame. I have never seen a frame swap that looked "clean". Besides, I have an off-road racing background so I am not totally lost if I have to start from scratch. I was just hoping not to have to invest that much time. The new dodge ram a arms look good, nice and beefy and long. I'm going to find one to borrow and put it on the hoist aso I can take some measurements.
Must work...................................Larry | | |
|
|
| |
