| |
Click on image for the lowdown. 
====
|
| | Forums66 Topics128,051 Posts1,055,729 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
|
| THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
|
| | | Joined: Dec 2018 Posts: 24 'Bolter | | 'Bolter Joined: Dec 2018 Posts: 24 | Hello- got a 1949 GMC FC102 and I'm planning a new shop. Having a time finding bumper to bumper length and overall width of the truck. Can some one point me to that?
From your view of building a shop for this truck woukd it be better to have a 20'x20' or 18'x22' or 16'x24' ? I'm limited to 400 sq ft by city code. See any advantages to either size. I plan to use 30% for yard equip and other stuff. Thank you for any assistance. | | | | | Joined: May 2006 Posts: 934 'Bolter | | 'Bolter Joined: May 2006 Posts: 934 | Is your building to be used as a garage for the truck or primarily used for a workshop?
For a workshop, I would go with the 20x20. The extra width compared to an 18’and 16’ foot width would be more convenient to move around. You can always work on the vehicle front end or back end in milder weather by pulling the vehicle partly outside through end doors if necessary.
Sorry I don’t have the exact 102 dimension handy but, it would be about 204” in total length with a 125.5” wheel base assuming an 87” bed for this series. The width is appximately 74”.
The 18x22 would be good compromise if storing the truck. From my experience in small shops I had always wanted a couple more feet of width over length.
Can you design a cantilever roof overhang on each end (or the sides for open air storage) to increase the roof length?
The internet has lots of information for small shop designs. There are lots of creative shop designs and ideas that have been built to address small shop needs. Check out woodworker websites like Fine Woodworking or woodweb. Although woodworking sites, there are forums specifically for small shop designs from people who were faced with zoning or code restrictions too.
Last edited by tom moore; 03/23/2019 10:58 PM.
| | | | | Joined: Dec 2018 Posts: 24 'Bolter | | 'Bolter Joined: Dec 2018 Posts: 24 | Hi Tom, mostly a shop to finish resto, then storage for the winter. I have to put lawn equip stuff in there too because I house that in a shed and I cant have 2 "accessory" buildings. I'm thinking 20x20 too. I did consider a cantilever extension also, but it woukd have to be dirt floor as it woukd be considered part of sq ft if I did a concrete floor. $ was a factor too. I appreciate your feedback. I'll look into those shop sites also. PT | | |
|
|
| |
