| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,196 Posts1,057,393 Members48,469 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2018 Posts: 93 'Bolter | | 'Bolter Joined: Jun 2018 Posts: 93 | This was a relatively easy project, but seemed like it took forever waiting on all the parts to get in and then I wasn't happy with the hammered paint finish so I re-sand blasted and re-painted it TWICE. Still not perfect but I am happy with the results. Here are some pics of my Harrison fresh air heater (model: H-02-47) restoration and 12v fan conversion. The new fan motor fits within the case of the original fan motor housing so it still looks all original when it is all said and done. Anyone else that maybe doing this I found a great guide here: http://devestechnet.com/Home/HeaterRestore Before 1 Before 2 Before 3 Old Motor Disassembled Old Motor Gutted Finished Motor 1 Finished Motor 2 Finished Heater 1 Finished Heater 2 Finished Heater 3Working on restoring the heater control valve now. I have the Ranco Type HF Heater Control Valve (directions on how to restore it in the link above as well at the bottom. If anyone has the same valve and is restoring it let me know. I ordered a replacement seal and NAPA sent me a whole box of 10 of them. Balkamp P/N#6601000. fyi- Here are the parts/supplies used on the heater: Paint Screws Rubber bumpers Blower MotorHopefully someday I get enough of these little pieces restored that there will be enough to make a truck!
Last edited by wilsjay; 09/09/2018 1:39 PM.
Jason Working on my first restomod on a 1950 3100 Shortbed (235 engine, 3 on the tree, disc brakes, etc.) 1950 Chevy 3100 | | | | | Joined: Jun 2008 Posts: 1,644 'Bolter | | 'Bolter Joined: Jun 2008 Posts: 1,644 | Great work Jason. The heater turned out really nice. Congratulations on a job well done!
Also, thanks for the link to the parts you used in the restoration. This is good reference material for anyone restoring their Fresh Aire heater.
Chuck
1950 Chevy 1/2 ton (all original)
1951 Chevy 1/2 ton (future streetrod)
1941 Chevy coupe
1938 Chevy coupe streetrod
| | | | | Joined: Jun 2018 Posts: 93 'Bolter | | 'Bolter Joined: Jun 2018 Posts: 93 | Thanks. For anyone shopping for the blower motor look for one for a '62 Gmc 1500. Got mine off the shelf at local parts store pretty cheap.
Jason Working on my first restomod on a 1950 3100 Shortbed (235 engine, 3 on the tree, disc brakes, etc.) 1950 Chevy 3100 | | |
|
|
| |
