| |
Click on image for the lowdown. 
====
| | |
7 members (Rusty Heaps, Bill Hanlon, Gdads51, Joe Franken, Charles in CA, Perro, TUTS 59),
68
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,179 Posts1,057,134 Members48,463 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2004 Posts: 6,233 'Bolter | | 'Bolter Joined: Mar 2004 Posts: 6,233 | I just found 2-gal of DuPont URO 1140 Primer Filler in a box on the shelf from a project we started 20 years ago. There is a gallon of Convertor and a quart of Activator also in the box. Is this stuff still any good? The paint still shakes/moves in the un-opened cans... If it's OK to use, is it compattable with new top coat paints? Thanks, Mike B  | | | | | Joined: Aug 2016 Posts: 146 Shop Shark | | Shop Shark Joined: Aug 2016 Posts: 146 | It may be good, may be not. But it would suck to have to strip it all off. I once used a can of epoxy primer that had been opened 6 months earlier, then re-sealed. It never would cure totally. The supplier said it was because it had a limited shelf life after opening. It was really a pain to take it all back off.
Nowadays I spray a test patch and see how it goes. I recently painted my wheels with a 20-year-old can of acrylic enamel when a test spray showed it performed like new.
Last edited by Jay Zed; 12/12/2017 9:41 AM.
| | |
|
|
| |
