Winter is Coming
Time to think about winterizing your Bolt.
A good Tech Tip WINTERIZING YOUR TRUCK including a link back to the Forums for additional tips.
Welcome to Stovebolt.com, Bassgas. You look to be in a rural/agricultural area. That is a relatively simple modification to make -- any welding shop or agriculturally related fabrication shop should be able to do that pretty easily. Especially if you have a plain community in your area (Amish or Mennonite, for example) they will have a welding shop and be able to do it pretty economically compared to everyone else.
A couple of years ago, I turned the flat bed on my F-350 into a dumper. That bed rusted out and now the truck has a bed from a surplus M-105 military trailer. Just a simple electric hydraulic pump and a lift cylinder. No need for PTO's.
~ John
A kid raised on Hotwheels, Matchbox and Tonka cannot be reasonably expected to own only one vehicle as an adult.
1949 Chevrolet 3804 In the Legacy Gallery | In the Gallery Forum 1973 IH 1310 Dump 1963 Kaiser M38A1 2001 International/AmTran RE3000 "Skoolie" 2014 Ford E-350 4x4 (Quigley)