| |
Click on image for the lowdown. 
====
| | |
8 members (Jay R, Gray_Ghost, WICruiser, Greg_H, Otto Skorzeny, Wheelie, 1955 1 Series, Napco Man),
149
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,083 Posts1,056,080 Members48,434 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2017 Posts: 23 Wrench Fetcher | | Wrench Fetcher Joined: Feb 2017 Posts: 23 | Bought headlight mounts from LMC. There are several others shown on the internet but they all appear the same. The mount attaches to the bucket with two adjusting screws and a spring. On the original, there are two holes that the spring can clip into to. On the replacement, there is an open notch. Has anyone replaced their mounts and encountered this problem. The adjusting spring is directly in the center of this open slot. I have seen complete headlamp assemblies and they all appear to use the original style mount with the holes. https://www.dropbox.com/s/72t4sc7az10c06f/headlight.jpg?dl=0The notch and holes are on the left side of the mount as shown in the photo. | | | | | Joined: Apr 2002 Posts: 2,168 A teacher, but always an apprentice. | | A teacher, but always an apprentice. Joined: Apr 2002 Posts: 2,168 | You might have to drill a couple holes. Or do what I did, send them back and find some originals from a wrecker, an old farmer, neighbor. That's a serious problem with many of the reproduction parts. They're close but no cigar. I had to build complete new rear tail light mounts for my truck because the reproductions weren't even close. It is frustrating but could you imagine trying to restore a studebaker or a Hudson! Yeesh. | | |
|
|
| |
